Запис Детальніше

Drug micro-carriers based on polymers and their sterilization

Електронний науковий архів Науково-технічної бібліотеки Національного університету "Львівська політехніка"


Поле	Співвідношення

Title	Drug micro-carriers based on polymers and their sterilization Мікро-носії лікарських засобів на основі полімерів та їх стерілізація

Creator	Costa, Renata Cerruti da Pereira, Emiliane Daher Silva, Fabricio Machado Jesus, Edgar Oliveira de Fernando G. Souza Jr.

Contributor	Universidade Federal do Rio de Janeiro, Cidade Universitária, Rio de Janeiro, Brasil

Subject	полі(бутилен сукцинат) системи доставки лікарських засобів мікрочастинки стерилізація хімічне модифікування poly(butylene succinate) drug delivery systems microparticles sterilization chemical modification

Description	Розглянуто основні аспекти виробництва біодеградуючих мікросфер, оптимізація параметрів процесу інкапсуляції лікарських засобів, методи стерилізації полімерних систем та вплив γ-опромінення на мікрочастинки. This paper presents the main aspects regarding the production of biodegradable microspheres, the optimization of parameters in the drug encapsulation process, the techniques available for polymeric systems sterilization and the effects of γ-irradiation on microparticles.

Date	2019-06-21T07:57:49Z 2019-06-21T07:57:49Z 2018-01-20 2018-01-20

Type	Article

Identifier	Drug micro-carriers based on polymers and their sterilization / Renata Cerruti da Costa, Emiliane Daher Pereira, Fabricio Machado Silva, Edgar Oliveira de Jesus, Fernando G. Souza Jr. // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2018. — Vol 12. — No 4. — P. 473–487. http://ena.lp.edu.ua:8080/handle/ntb/45193 Drug micro-carriers based on polymers and their sterilization / Renata Cerruti da Costa, Emiliane Daher Pereira, Fabricio Machado Silva, Edgar Oliveira de Jesus, Fernando G. Souza Jr. // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2018. — Vol 12. — No 4. — P. 473–487.

Language	en

Relation	Chemistry & Chemical Technology, 4 (12), 2018 https://doi.org/10.23939/chcht09.04.485 https://doi.org/10.1016/j.jcis.2012.04.004 https://doi.org/10.1039/C3PY01636F https://doi.org/10.1007/978-1-4939-0363-4_1 https://doi.org/10.1038/mt.2010.105 https://doi.org/10.1016/j.jconrel.2014.04.048 https://doi.org/10.1016/j.actbio.2009.12.014 https://doi.org/10.1016/j.fitote.2010.05.001 https://doi.org/10.1016/j.biomaterials.2011.02.044 https://doi.org/10.1016/j.jconrel.2011.12.012 https://doi.org/10.1016/j.jconrel.2012.10.015 https://doi.org/10.1016/j.jconrel.2010.05.026 https://doi.org/10.1016/j.ijpharm.2011.04.005 https://doi.org/10.1016/j.ejps.2016.03.012 https://doi.org/10.1016/j.polymer.2010.04.032 https://doi.org/10.1016/j.jconrel.2009.11.020 https://doi.org/10.1016/j.jcis.2016.08.058 https://doi.org/10.1002/smll.201000765 https://doi.org/10.1002/adma.201001497 https://doi.org/10.1039/c2cs15296g https://doi.org/10.1002/anie.200906266 https://doi.org/10.1016/j.addr.2011.03.010 https://doi.org/10.1016/j.ejps.2009.02.019 https://doi.org/10.1016/j.jconrel.2010.10.013 https://doi.org/10.2174/138920010791110836 https://doi.org/10.1021/jf202135j https://doi.org/10.1016/j.addr.2011.12.009 https://doi.org/10.1016/j.addr.2014.12.004 https://doi.org/10.1016/j.ejpb.2010.06.007 https://doi.org/10.1016/j.powtec.2011.12.063 https://doi.org/10.1016/j.colsurfb.2012.10.001 https://doi.org/10.1186/1477-3155-9-55 https://doi.org/10.1016/j.cocis.2010.12.005 https://doi.org/10.1016/j.ejpb.2012.07.014 https://doi.org/10.1007/s13346-012-0108-9 https://doi.org/10.22270/jddt.v2i3.163 https://doi.org/10.2174/187221111795471418 https://doi.org/10.1016/j.carbpol.2012.08.074 https://doi.org/10.3109/03639045.2011.623355 https://doi.org/10.1016/j.ijpharm.2006.01.034 https://doi.org/10.1016/j.vaccine.2005.12.037 https://doi.org/10.1016/j.vaccine.2011.08.055 https://doi.org/10.1007/s10973-011-1804-2 https://doi.org/10.1016/j.polymdegradstab.2012.02.015 https://doi.org/10.1016/j.msec.2016.07.031 https://doi.org/10.1002/jbm.b.32964 https://doi.org/10.1016/j.ajic.2012.11.005 https://doi.org/10.1016/j.carbpol.2016.10.029 https://doi.org/10.1007/s10561-006-9019-7 https://doi.org/10.1016/j.radphyschem.2009.08.025 https://doi.org/10.1007/s10967-009-0321-2 https://doi.org/10.4172/2157-7439.S5-001 https://doi.org/10.1208/s12249-011-9644-8 https://doi.org/10.5731/pdajpst.2012.00774 https://doi.org/10.1016/j.biomaterials.2009.11.075 https://doi.org/10.1146/annurevchembioeng-073009-100847 https://doi.org/10.1007/s11095-009-0014-0 https://doi.org/10.1016/j.colsurfb.2009.09.001 https://doi.org/10.1007/s11095-010-0159-x https://doi.org/10.1016/j.ijpharm.2007.09.041 https://doi.org/10.1080/10611860903067301 https://doi.org/10.1021/ar200085c https://doi.org/10.1039/C0NR00634C https://doi.org/10.1016/j.addr.2009.11.002 https://doi.org/10.1021/ar400130a https://doi.org/10.1016/j.jpha.2012.02.005 https://doi.org/10.1016/j.ijpharm.2013.02.057 https://doi.org/10.1016/j.carbpol.2016.06.039 https://doi.org/10.1016/j.molstruc.2011.05.001 https://doi.org/10.1016/j.ijpharm.2014.12.014 https://doi.org/10.1016/j.tacc.2016.06.004 https://doi.org/10.1016/j.biomaterials.2011.09.096 https://doi.org/10.1016/0169-409X(95)00026-4 https://doi.org/10.1039/c2cs15327k https://doi.org/10.1002/jbm.b.32888 https://doi.org/10.1016/j.ijpharm.2016.10.002 https://doi.org/10.1016/j.jconrel.2016.11.003 https://doi.org/10.3390/polym3031377 https://doi.org/10.1016/j.reactfunctpolym.2010.10.009 https://doi.org/10.1016/j.nantod.2012.08.005 https://doi.org/10.1016/j.preteyeres.2014.04.002 https://doi.org/10.1016/j.addr.2009.11.019 https://doi.org/10.1016/j.biomaterials.2013.01.084 https://doi.org/10.1155/2013/340315 https://doi.org/10.1016/j.jconrel.2010.12.016 https://doi.org/10.1039/C0CS00091D https://doi.org/10.1016/j.ejpb.2012.01.011 https://doi.org/10.1016/j.jconrel.2015.09.051 https://doi.org/10.1016/j.apsusc.2013.09.081 https://doi.org/10.1016/j.addr.2016.07.002 https://doi.org/10.1016/j.matlet.2016.06.020 https://doi.org/10.1590/0104-1428.2323 https://doi.org/10.1016/j.jconrel.2014.03.054 https://doi.org/10.1016/j.eurpolymj.2016.01.016 https://doi.org/10.1016/j.jconrel.2012.12.005 https://doi.org/10.1016/j.biomaterials.2011.08.072 https://doi.org/10.1016/j.jconrel.2011.09.064 https://doi.org/10.1021/bm801394s https://doi.org/10.1016/j.ijpharm.2010.08.008 https://doi.org/10.1163/156856209X410283 https://doi.org/10.1155/2013/581684 https://doi.org/10.1002/jctb.2392 https://doi.org/10.1016/j.jbiosc.2010.07.014 https://doi.org/10.1016/j.eurpolymj.2015.07.047 https://doi.org/10.1002/1439-2054(20010501)286:5<316::AID-MAME316>3.0.CO;2-N https://doi.org/10.1038/pj.2012.157 https://doi.org/10.1016/j.msec.2012.07.025 https://doi.org/10.1016/j.msec.2015.01.039 https://doi.org/10.1002/app.22009 https://doi.org/10.1002/biot.201000136 https://doi.org/10.1002/pen.24029 https://doi.org/10.1002/1097-4628(20010207)79:6<1025::AIDAPP50>3.0.CO;2-7 https://doi.org/10.1039/c2sm25308a https://doi.org/10.3109/02652040309178072 https://doi.org/10.1016/S0141-3910(98)00041-X https://doi.org/10.1039/C4PY01305K https://doi.org/10.3390/polym6122974 https://doi.org/10.1002/term.391 https://doi.org/10.1039/c3tb21371d https://doi.org/10.1016/j.polymer.2009.01.042 https://doi.org/10.1016/j.actbio.2009.07.026 https://doi.org/10.1016/j.ijpharm.2012.04.009 https://doi.org/10.1155/2014/153453 https://doi.org/10.1163/092050610X537138 https://doi.org/10.2174/187221110791185024 https://doi.org/10.1039/b923309a https://doi.org/10.1089/dia.2011.0050 https://doi.org/10.1002/mabi.200900402 https://doi.org/10.1016/j.jconrel.2011.12.021 https://doi.org/10.1002/dmrr.2463 https://doi.org/10.1016/j.matlet.2011.10.042 https://doi.org/10.1016/j.ejpb.2016.08.018 https://doi.org/10.1002/biot.200900218 https://doi.org/10.1016/j.ijpharm.2011.06.010 https://doi.org/10.1016/j.jconrel.2011.10.037 https://doi.org/10.2174/138920012798356934 https://doi.org/10.1016/j.ces.2012.02.050 https://doi.org/10.1016/j.ejpb.2012.03.004 https://doi.org/10.1016/j.jconrel.2004.07.028 https://doi.org/10.1016/j.jconrel.2011.07.031 https://doi.org/10.1016/j.nantod.2012.04.002 https://doi.org/10.1016/j.biomaterials.2009.09.036 https://doi.org/10.1016/j.yexcr.2010.02.004 https://doi.org/10.1016/S0169-409X(00)00124-1 https://doi.org/10.1002/9783527634057.ch32 https://doi.org/10.1021/mz200222d https://doi.org/10.1016/j.porgcoat.2011.03.014 https://doi.org/10.1016/j.porgcoat.2010.05.003 https://doi.org/10.1016/S0168-3659(01)00299-1 https://doi.org/10.1016/j.ejpb.2010.09.016 https://doi.org/10.3109/02652040903131301 https://doi.org/10.1021/la903592s https://doi.org/10.1039/c2cc31932b https://doi.org/10.1038/nrd4363 https://doi.org/10.1016/j.jconrel.2012.07.003 https://doi.org/10.1016/j.ijpharm.2010.06.045 https://doi.org/10.1016/j.ijpharm.2012.09.019 https://doi.org/10.1002/adfm.201102746 https://doi.org/10.1016/j.ijpharm.2006.12.037 https://doi.org/10.1002/jbm.a.34153 https://doi.org/10.1016/j.ejpb.2010.11.010 https://doi.org/10.1016/j.ejps.2013.04.006 https://doi.org/10.1039/c2cs15294k https://doi.org/10.1021/ja207150n https://doi.org/10.1016/j.polymer.2012.05.056 https://doi.org/10.1016/j.biomaterials.2009.09.030 https://doi.org/10.1016/j.addr.2011.05.004 https://doi.org/10.1016/j.jconrel.2010.07.116 https://doi.org/10.1016/j.addr.2011.06.016 https://doi.org/10.1016/j.jconrel.2007.03.022 https://doi.org/10.1016/j.ijpharm.2016.03.048 https://doi.org/10.1016/j.colsurfb.2011.02.005 https://doi.org/10.1208/s12249-010-9528-3 https://doi.org/10.1016/j.jconrel.2014.09.003 https://doi.org/10.1016/j.foodres.2010.10.018 https://doi.org/10.1007/s00217-010-1246-2 https://doi.org/10.1007/s11947-014-1317-7 https://doi.org/10.1016/j.ijpharm.2008.07.018 https://doi.org/10.1016/j.rser.2011.07.152 https://doi.org/10.1007/s10853-011-6037-z https://doi.org/10.1016/j.foodhyd.2010.02.002 https://doi.org/10.1039/c002866e https://doi.org/10.1002/smll.201300372 https://doi.org/10.1016/j.ejpb.2012.12.009 https://doi.org/10.1016/j.ijpharm.2012.12.037 https://doi.org/10.1016/j.msec.2013.07.009 https://doi.org/10.1016/j.jconrel.2010.03.014 https://doi.org/10.1016/j.biomaterials.2009.09.048 https://doi.org/10.4161/biom.24281 https://doi.org/10.1016/j.jconrel.2011.05.018 https://doi.org/10.1016/j.jcis.2009.10.002 https://doi.org/10.1016/j.jcis.2013.11.037 https://doi.org/10.3390/polym3010131 https://doi.org/10.1016/j.jcis.2016.01.021 https://doi.org/10.1016/j.ijpharm.2016.01.020 https://doi.org/10.1016/j.colsurfa.2009.08.005 https://doi.org/10.1016/j.colsurfb.2010.07.047 https://doi.org/10.1016/j.ejpb.2010.03.005 https://doi.org/10.1016/j.biomaterials.2008.09.007 https://doi.org/10.1016/j.jmmm.2006.10.1170 https://doi.org/10.1016/j.jconrel.2004.07.007 https://doi.org/10.1081/DDC-100102197 https://doi.org/10.3109/02652049809006848 https://doi.org/10.1021/ja808137c https://doi.org/10.1016/j.ijpharm.2008.04.042 https://doi.org/10.1016/S0168-3659(02)00235-3 https://doi.org/10.2174/187221112802652606 https://doi.org/10.1166/jbn.2011.1279 https://doi.org/10.1002/pola.28511 https://doi.org/10.1002/pen.21572 https://doi.org/10.1016/j.eurpolymj.2015.05.015 https://doi.org/10.1002/ejlt.201300212 https://doi.org/10.1002/app.44129 https://doi.org/10.2174/2452271601666170221124329 https://doi.org/10.1002/pen.22002 https://doi.org/10.1016/j.jconrel.2004.10.015 https://doi.org/10.1590/S0104-14282007000200016 https://doi.org/10.1016/j.aca.2016.08.014 https://doi.org/10.1016/j.ijpharm.2008.08.015 https://doi.org/10.1016/j.colsurfb.2013.08.048 https://doi.org/10.1021/am503030c https://doi.org/10.1016/j.colsurfb.2005.12.001 https://doi.org/10.1016/j.polymer.2015.04.083 https://doi.org/10.1615/AtomizSpr.v10.i1.30 https://doi.org/10.1016/S0939-6411(01)00184-9 https://doi.org/10.1023/B:PHAM.0000036925.45002.a2 https://doi.org/10.1021/ja505212y https://doi.org/10.1016/j.ijpharm.2003.10.037 https://doi.org/10.1002/pi.1125 https://doi.org/10.1021/la0605135 https://doi.org/10.1016/S0378-5173(98)00169-0 https://doi.org/10.1016/S0168-3659(00)00315-1 https://doi.org/10.1007/BF02980037 https://doi.org/10.1021/acs.molpharmaceut.5b00961 https://doi.org/10.15171/apb.2017.028 https://doi.org/10.1016/j.colsurfb.2016.06.013 https://doi.org/10.1016/j.colsurfb.2015.07.024 https://doi.org/10.3109/21691401.2015.1042109 https://doi.org/10.1016/j.ejps.2016.08.047 https://doi.org/10.1016/j.msec.2016.10.030 https://doi.org/10.1097/GOX.0000000000000819 https://doi.org/10.3109/10837450.2016.1163393 https://doi.org/10.1016/S0378-5173(97)00394-3 https://doi.org/10.1016/j.actbio.2009.11.022 https://doi.org/10.1016/j.ajic.2006.10.014 https://doi.org/10.1016/j.snb.2012.10.040 https://doi.org/10.1590/1980-5373-MR-2015-0200 http://dx.doi.org/10.1016/j.mpaic.2016.07.002 https://doi.org/10.1016/j.eurpolymj.2016.07.016 https://doi.org/10.1002/adhm.201600870 https://doi.org/10.1016/j.prosdent.2015.11.001 https://doi.org/10.1002/9780470571224.pse370 https://doi.oeg/10.1111/jicd.12244 https://doi.org/10.1080/11263504.2016.1231140 https://doi.org/10.1016/S0378-5173(01)00944-9 https://doi.org/10.1016/j.mee.2013.02.021 https://doi.org/10.1016/j.matlet.2013.04.024 https://doi.org/10.1016/j.actbio.2016.01.038 https://doi.org/10.1016/j.radphyschem.2016.09.015 https://doi.org/10.1007/s10561-015-9536-3 https://doi.org/10.1002/mame.201600133 https://doi.org/10.1016/j.proeng.2013.05.099 https://doi.org/10.1016/j.radphyschem.2016.03.012 https://doi.org/10.1016/j.polymdegradstab.2016.03.019 https://doi.org/10.1002/app.11944 https://doi.org/10.1016/j.radphyschem.2007.01.014 https://doi.org/10.1016/j.ijpharm.2005.12.013 https://doi.org/10.1021/acsami.5b10869 https://doi.org/10.1016/j.nimb.2005.03.247 https://doi.org/10.1016/j.radphyschem.2007.06.006 https://doi.org/10.1016/0969-806X(94)90165-1 https://doi.org/10.1016/j.actbio.2005.10.003 https://doi.org/10.1016/j.polymdegradstab.2010.10.016 http://wwwpub.iaea.org/books/IAEABooks/7691/Trends-in-Radiation-Sterilization-of-Health-Care-Products https://doi.org/10.1002/pat.4054 https://doi.org/10.1016/j.radphyschem.2016.04.004 https://doi.org/10.1016/j.radphyschem.2016.03.010 https://doi.org/10.1007/s10853-016-9875-x https://doi.org/10.1016/j.radphyschem.2016.03.024 https://doi.org/10.1016/j.radphyschem.2012.03.013 https://doi.org/10.1002/pc.24028 https://doi.org/10.1177/0883911515598795 https://doi.org/10.1016/j.polymertesting.2015.11.003 https://doi.org/10.1007/s10856-016-5793-3 https://doi.org/10.1177/2041731416648810 https://doi.org/10.1081/MA-100104947 https://doi.org/10.1002/pi.1579 https://doi.org/10.1002/app.37715 https://doi.org/10.1080/00914037.2014.977900 https://doi.org/10.1039/c3tb20267d https://doi.org/10.7317/pk.2015.39.3.418 https://doi.org/10.1016/j.polymdegradstab.2015.04.025 https://doi.org/10.1016/j.jconrel.2004.06.004 https://doi.org/10.1016/j.radphyschem.2013.09.002 https://doi.org/10.1039/C5RA08319B https://doi.org/10.1155/2014/420616 https://doi.org/10.1590/S1516-14392012005000173 https://doi.org/10.1080/10406638.2015.1042551 https://doi.org/10.1051/matecconf/20166701004 https://doi.org/10.1016/j.ejpb.2007.12.014 https://doi.org/10.1007/s11095-013-1019-2 https://doi.org/10.1007/s10856-015-5621-1 https://doi.org/10.1016/S0014-827X(01)01171-5 https://doi.org/10.1016/j.proche.2016.03.026 https://doi.org/10.1016/j.colsurfb.2014.01.037 https://doi.org/10.1016/j.vibspec.2014.01.012 https://doi.org/10.2174/1567201811310020002 https://doi.org/10.1016/j.ejpb.2011.10.007 https://doi.org/10.3109/10837450.2015.1102280 https://doi.org/10.1016/j.ijpharm.2012.07.019 https://doi.org/10.1016/j.msec.2014.12.044 https://doi.org/10.1016/j.jconrel.2005.05.029 https://doi.org/10.3390/jfb6010001 https://doi.org/10.1016/j.jddst.2016.08.006 [1] Kolesnyk I., Konovalova V., Burban A.: Chem. Chem. Technol.,2015, 9, 485. https://doi.org/10.23939/chcht09.04.485 [2] Liu Y., Wang Y., Zhuang D. et al.: J. Colloid Interf. Sci., 2012,377, 197. https://doi.org/10.1016/j.jcis.2012.04.004 [3] Nguyen C., Tran T., Lu X., Kasi R.: Polym. Chem., 2014, 5, 2774.https://doi.org/10.1039/C3PY01636F [4] Jain K.: Current Status and Future Prospects of Drug Delivery Systems. [in:] Jain K. (Ed.), Drug Delivery System. Springer, New York 2014, 1-56. https://doi.org/10.1007/978-1-4939-0363-4_1 [5] Sun D., Zhuang X., Xiang X. et al.:Mol. Ther., 2010, 18, 1606.https://doi.org/10.1038/mt.2010.105 [6]Weiser J., SaltzmanW.: J. Control. Release, 2014, 190, 664.https://doi.org/10.1016/j.jconrel.2014.04.048 [7] Ye F., Guo H., Zhang H., He X.:Acta Biomater., 2010, 6, 2212. https://doi.org/10.1016/j.actbio.2009.12.014 [8] Ajazuddin, Saraf S.: Fitoterapia, 2010, 81, 680.https://doi.org/10.1016/j.fitote.2010.05.001 [9] Xin H., Jiang X., Gu J. et al.: Biomaterials, 2011, 32, 4293.https://doi.org/10.1016/j.biomaterials.2011.02.044 [10] Gong J., ChenM., Zheng Y. et al.: J. Control. Release, 2012,159, 312. https://doi.org/10.1016/j.jconrel.2011.12.012 [11] Ford Versypt A., Pack D., Braatz R.: J. Control. Release, 2013,165, 29. https://doi.org/10.1016/j.jconrel.2012.10.015 [12] Lee J., Oh Y., Lee S., Lee K.: J. Control. Release, 2010, 146, 61.https://doi.org/10.1016/j.jconrel.2010.05.026 [13] Bohr A., Kristensen J., Stride E. et al.: Int. J. Pharm., 2011, 412,59. https://doi.org/10.1016/j.ijpharm.2011.04.005 [14] Rodríguez Villanueva J., Bravo-Osuna I., Herrero-Vanrell R. et al.: Eur. J. Pharm. Sci., 2016, 92, 287.https://doi.org/10.1016/j.ejps.2016.03.012 [15] Yang X., Chen L., Han B. et al.: Polymer, 2010, 51, 2533.https://doi.org/10.1016/j.polymer.2010.04.032 [16] Hirota K., Hasegawa T., Nakajima T. et al.: J. Control. Release,2010, 142, 339. https://doi.org/10.1016/j.jconrel.2009.11.020 [17] Tasker A., Hitchcock J., He L. et al.: J. Colloid Interf. Sci., 2016,484, 10. https://doi.org/10.1016/j.jcis.2016.08.058 [18] Zelikin A., Price A., Städler B.: Small, 2010, 6, 2201.https://doi.org/10.1002/smll.201000765 [19]Wang Y., Yan Y., Cui J. et al.: Adv. Mater., 2010, 22, 4293.https://doi.org/10.1002/adma.201001497 [20] Koker S., Hoogenboom R., Geest B.: Chem. Soc. Rev., 2012, 41,2867. https://doi.org/10.1039/c2cs15296g [21] De Cock L., De Koker S., De Geest B., et al.: Angew. Chem. Int. Edit., 2010, 49, 6954. https://doi.org/10.1002/anie.200906266 [22] DelceaM., Möhwald H., Skirtach A.: Adv. Drug Deliv. Rev.,2011, 63, 730. https://doi.org/10.1016/j.addr.2011.03.010 [23] Shaikh J., Ankola D., Beniwal V. et al.: Eur. J. Pharm. Sci., 2009,37, 223. https://doi.org/10.1016/j.ejps.2009.02.019 [24] Gao F., Zhang Z., Bu H. et al.: J. Control. Release, 2011, 149,168. https://doi.org/10.1016/j.jconrel.2010.10.013 [25] Cai Z.,Wang Y., Zhu L-J., Liu Z-Q.: Curr. DrugMetab., 2010,11, 197. https://doi.org/10.2174/138920010791110836 [26] Xie X., Tao Q., Zou Y. et al.: J. Agric. Food Chem., 2011, 59,9280. https://doi.org/10.1021/jf202135j [27] Ensign L., Cone R., Hanes J.: Adv. Drug Deliv. Rev., 2012, 64,557. https://doi.org/10.1016/j.addr.2011.12.009 [28] das Neves J., Nunes R.,Machado A., Sarmento B.:Vaginal Drug Deliv., 2015, 92, 53. https://doi.org/10.1016/j.addr.2014.12.004 [29] Gaucher G., Satturwar P., JonesM-C. et al.: Eur. J. Pharm. Biopharm., 2010, 76, 147. https://doi.org/10.1016/j.ejpb.2010.06.007 [30]Mahajan H., Tatiya B., Nerkar P.: Powder Technol., 2012, 221,168. https://doi.org/10.1016/j.powtec.2011.12.063 [31] Perioli L., Pagano C.: Colloid. Surface B, 2013, 102, 915.https://doi.org/10.1016/j.colsurfb.2012.10.001 [32]Mahapatro A., Singh D.: J. Nanobiotechnol., 2011, 9, 55.https://doi.org/10.1186/1477-3155-9-55 [33] Plapied L., Duhem N., des Rieux A., Préat V.: Curr. Opin. Colloid. Interf. Sci., 2011, 16, 228.https://doi.org/10.1016/j.cocis.2010.12.005 [34]Wang X-Q., Zhang Q.: Eur. J. Pharm. Biopharm., 2012, 82, 219.https://doi.org/10.1016/j.ejpb.2012.07.014 [35] Djupesland P.:Drug Deliv. Transl. Res., 2013, 3, 42.https://doi.org/10.1007/s13346-012-0108-9 [36] Singh AK., Singh A., Madhv N.: J. Drug Deliv. Ther., 2012, 2,22. https://doi.org/10.22270/jddt.v2i3.163 [37] Gupta S., Gabrani R., Ali J., Dang S.: Recent Pat. Drug Deliv. Formul., 2011, 5, 82. https://doi.org/10.2174/187221111795471418 [38] Abruzzo A., Bigucci F., Cerchiara T. et al.: Carbohydr. Polym.,2013, 91, 651. https://doi.org/10.1016/j.carbpol.2012.08.074 [39] Pereira R., BruschiM.:Drug Dev. Ind. Pharm., 2012, 38, 643.https://doi.org/10.3109/03639045.2011.623355 [40] Fernández-Carballido A., Puebla P., Herrero-Vanrell R., Pastoriza P.: Int. J. Pharm., 2006, 313, 129.https://doi.org/10.1016/j.ijpharm.2006.01.034 [41] The United States Pharmacopeial Convention. United Book Press, Baltimore 2013, 71-74; 1141-1145. [42] Téllez S., Casimiro R., Vela A. et al.:Vaccine, 2006, 24, 1710.https://doi.org/10.1016/j.vaccine.2005.12.037 [43] Parveen S., Kaur S., David S. et al.:Vaccine, 2011, 29, 8012.https://doi.org/10.1016/j.vaccine.2011.08.055 [44] TanM., Ren Y., Yan D. et al.: J. Therm. Anal. Calorim., 2011,109, 1069. https://doi.org/10.1007/s10973-011-1804-2 [45] Hsiao C-Y., Liu S-J.,Wen-Neng Ueng S., Chan E-C.: Polym. Degrad. Stab., 2012, 97, 715.https://doi.org/10.1016/j.polymdegradstab.2012.02.015 [46] SavarisM., Santos V., Brandalise R.:Mater. Sci. Eng. C, 2016,69, 661. https://doi.org/10.1016/j.msec.2016.07.031 [47] França R., Mbeh D., Samani T. et al.: J. Biomed. Mater. Res. B,2013, 101, 1444. https://doi.org/10.1002/jbm.b.32964 [48] RutalaW.,Weber D.: Am. J. Infect. Control., 2013, 41, S2.https://doi.org/10.1016/j.ajic.2012.11.005. [49] Asasutjarit R., Theerachayanan T., Kewsuwan P. et al.: Carbohydr. Polym., 2017, 157, 603.https://doi.org/10.1016/j.carbpol.2016.10.029 [50] Nguyen H., Morgan D., ForwoodM.: Cell Tissue Bank, 2007, 8,81. https://doi.org/10.1007/s10561-006-9019-7 [51] Zulli G., Lopes P., VelascoM. et al.: Radiat. Phys. Chem., 2010,79, 286. https://doi.org/10.1016/j.radphyschem.2009.08.025 [52] IlčinM., Holá O., Bakajová B., Kučerík J.: J. Radioanal. Nucl. Chem., 2010, 283, 9. https://doi.org/10.1007/s10967-009-0321-2 [53] Pokorný D., ŠloufM., Fulín P.: Acta Chir. Orthop. Traumatol. Cech., 2012, 79, 213. [54] Zheng J., Clogston J., Patri A. et al.: J. Nanomedicine Nanotechnol., 2011, 5, 001. https://doi.org/10.4172/2157-7439.S5-001 [55] Farmacopeia Brasileira. Agência Nacional de Vigilância Sanitária. Anvisa 2010. [56] Lambert B.,Mendelson T., CravenM.: AAPS Pharm. Sci. Tech.,2011, 12, 1116. https://doi.org/10.1208/s12249-011-9644-8 [57] SilindirM., Ozer Y.: PDA J. Pharm. Sci. Technol., 2012, 66,184. https://doi.org/10.5731/pdajpst.2012.00774 [58] Kokai L., Ghaznavi A., Marra K.: Biomaterials, 2010, 31, 2313.https://doi.org/10.1016/j.biomaterials.2009.11.075 [59] LiechtyW., Kryscio D., Slaughter B., Peppas N.: Annu. Rev. Chem. Biomol. Eng., 2010, 1, 149. https://doi.org/10.1146/annurevchembioeng-073009-100847 [60] Sun Q., Silva E.,Wang A. et al.: Pharm. Res., 2010, 27, 264.https://doi.org/10.1007/s11095-009-0014-0 [61] Kumari A., Yadav SK., Yadav SC.: Colloid. Surf. B, 2010, 75, 1.https://doi.org/10.1016/j.colsurfb.2009.09.001 [62] Lee S., Hughes P., Ross A., RobinsonM.: Pharm. Res., 2010, 27,2043. https://doi.org/10.1007/s11095-010-0159-x [63] Lyons J., Blackie P., Higginbotham C.: Int. J. Pharm., 2008, 351,201. https://doi.org/10.1016/j.ijpharm.2007.09.041 [64] Uddin A., Bejugam N., Gayakwad S. et al.: J. Drug Target.,2009, 17, 553. https://doi.org/10.1080/10611860903067301 [65] Yoo D., Lee J-H., Shin T-H., Cheon J.:Acc. Chem. Res., 2011,44, 863. https://doi.org/10.1021/ar200085c [66] Behrens S.:Nanoscale, 2011, 3, 877.https://doi.org/10.1039/C0NR00634C [67] Veiseh O., Gunn J., ZhangM.: Adv. Drug Deliv. Rev., 2010, 62,284. https://doi.org/10.1016/j.addr.2009.11.002 [68] DohertyC., Buso D., Hill A. et al.:Acc. Chem. Res., 2014, 47,396. https://doi.org/10.1021/ar400130a [69] Severino P., de Oliveira G., Ferraz H. et al.: J. Pharm. Anal.,2012, 2, 188. https://doi.org/10.1016/j.jpha.2012.02.005 [70] Pastor M., Esquisabel A., Talavera A. et al.: Int. J. Pharm., 2013,448, 247. https://doi.org/10.1016/j.ijpharm.2013.02.057 [71] Cosco D., Failla P., Costa N. et al.: Carbohydr. Polym., 2016,152, 583. https://doi.org/10.1016/j.carbpol.2016.06.039 [72] Dreve S., Kacso I., Popa A. et al.: J. Mol. Struct., 2011, 997, 78.https://doi.org/10.1016/j.molstruc.2011.05.001 [73] Kazazi-Hyseni F., Zandstra J., Popa E. et al.: Int. J. Pharm., 2015,482, 99. https://doi.org/10.1016/j.ijpharm.2014.12.014 [74] Rogobete A., DragomirescuM., Bedreag O. et al.: Trends Anaesth. Crit. Care., 2016, 9, 27.https://doi.org/10.1016/j.tacc.2016.06.004 [75] Ting C-Y., Fan C-H., Liu H-L. et al: Biomaterials, 2012, 33, 704.https://doi.org/10.1016/j.biomaterials.2011.09.096 [76] Gref R., Domb A., Quellec P. et al.: Adv. Drug Deliv. Rev.,1995, 16, 215. https://doi.org/10.1016/0169-409X(95)00026-4 [77] ElsabahyM., Wooley K.: Chem. Soc. Rev., 2012, 41, 2545.https://doi.org/10.1039/c2cs15327k [78]Mohanraj K., Sethuraman S., Krishnan U.: J. Biomed. Mater. Res. B, 2013, 101B, 840. https://doi.org/10.1002/jbm.b.32888 [79]Wang Q-S., Wang G-F., Zhou J. et al.: Int. J. Pharm., 2016, 515,176. https://doi.org/10.1016/j.ijpharm.2016.10.002 [80] JanssenM., Timur U., Woike N. et al.: J. Control. Release, 2016,244A, 30. https://doi.org/10.1016/j.jconrel.2016.11.003 [81]Makadia H., Siegel S.: Polymers, 2011, 3, 1377.https://doi.org/10.3390/polym3031377 [82]Miyata K., Christie R., Kataoka K.: React. Funct. Polym., 2011,71, 227. https://doi.org/10.1016/j.reactfunctpolym.2010.10.009 [83] Deng C., Jiang Y., Cheng R. et al.:Nano Today, 2012, 7, 467.https://doi.org/10.1016/j.nantod.2012.08.005 [84] Herrero-Vanrell R., Bravo-Osuna I., Andrés-Guerrero V. et al.: Prog. Retin. Eye Res., 2014, 42, 27.https://doi.org/10.1016/j.preteyeres.2014.04.002 [85] Sharma P., Garg S.: Adv. Drug Deliv. Rev., 2010, 62, 491.https://doi.org/10.1016/j.addr.2009.11.019 [86] Cheng R., Meng F., Deng C. et al.: Biomaterials, 2013, 34, 3647.https://doi.org/10.1016/j.biomaterials.2013.01.084 [87] XuW., Ling P., Zhang T.: J. Drug Deliv., 2013, 2013, 340315.https://doi.org/10.1155/2013/340315. [88] Seyednejad H., Ghassemi A., van Nostrum C. et al.: J. Control. Release, 2011, 152, 68. https://doi.org/10.1016/j.jconrel.2010.12.016 [89] Cameron D., Shaver M.: Chem. Soc. Rev., 2011, 40, 1761.https://doi.org/10.1039/C0CS00091D [90] Aliabadi H., LandryB., Mahdipoor P. et al.: Eur. J. Pharm. Biopharm., 2012, 81, 33. https://doi.org/10.1016/j.ejpb.2012.01.011 [91] Shen J., Choi S., QuW. et al.: J. Control. Release, 2015, 218, 2.https://doi.org/10.1016/j.jconrel.2015.09.051 [92] Grumezescu V., Socol G., Grumezescu A. et al.: Appl. Surf. Sci.,2014, 302, 262. https://doi.org/10.1016/j.apsusc.2013.09.081 [93] Jain A., Kunduru K., Basu A. et al.: Adv. Drug Deliv. Rev.,2016, 107, 213. https://doi.org/10.1016/j.addr.2016.07.002 [94] Park J-H., Han C-M., Lee E-J., KimH-W.:Mater. Lett., 2016,181, 92. https://doi.org/10.1016/j.matlet.2016.06.020 [95] Pereira E., Cerruti R., Fernandes E. et al.: PolÃ-Meros., 2016, 26,137. https://doi.org/10.1590/0104-1428.2323 [96] Blumenthal P.,Manickam S., Espadas C., Rajadas J.: 69th American Society for ReproductiveMedicine (ASRM) Annual Meeting, USA, Boston, Oct. 12-17, 2013, 316. [97] Park K.: 30th Anniv. Spec. Issue, 2014, 190, 3.https://doi.org/10.1016/j.jconrel.2014.03.054 [98] Gigli M., FabbriM., Lotti N. et al.: Eur. Polym. J., 2016, 75, 431.https://doi.org/10.1016/j.eurpolymj.2016.01.016 [99] Cho H., Lai T., Kwon G.: J. Control. Release, 2013, 166, 1.https://doi.org/10.1016/j.jconrel.2012.12.005 [100] Zhu Z., Xie C., Liu Q. et al.: Biomaterials, 2011, 32, 9525.https://doi.org/10.1016/j.biomaterials.2011.08.072 [101] Dash T., Konkimalla V.: J. Control. Release, 2012, 158, 15.https://doi.org/10.1016/j.jconrel.2011.09.064 [102] Grage K., Jahns A., Parlane N. et al.: Biomacromolecules, 2009,10, 660. https://doi.org/10.1021/bm801394s [103] ShahM., NaseerM., ChoiM. et al.: Int. J. Pharm., 2010, 400,165. https://doi.org/10.1016/j.ijpharm.2010.08.008 [104] Xiong Y-C., Yao Y-C., Zhan X-Y., Chen G-Q.: J. Biomater. Sci. Polym. Edn., 2010, 21, 127.https://doi.org/10.1163/156856209X410283 [105] Shrivastav A., Kim H-Y., Kim Y-R.: BioMed Res. Int., 2013,2013, 581684. https://doi.org/10.1155/2013/581684. [106] Akaraonye E., Keshavarz T., Roy I.: J. Chem. Technol. Biotechnol., 2010, 85, 732. https://doi.org/10.1002/jctb.2392 [107] Chanprateep S.: J. Biosci. Bioeng., 2010, 110, 621.https://doi.org/10.1016/j.jbiosc.2010.07.014 [108]Murase S., Aymat M., Calvet A. et. al.: Eur. Polym. J., 2015,71, 196. https://doi.org/10.1016/j.eurpolymj.2015.07.047 [109] Nugroho P., Mitomo H., Yoshii F. et. al.:Macromol. Mater. Eng., 2001, 286, 316. https://doi.org/10.1002/1439-2054(20010501)286:5<316::AID-MAME316>3.0.CO;2-N [110] Hwang S., Yoo E., Im S.: Polym. J., 2012, 44, 1179.https://doi.org/10.1038/pj.2012.157 [111] Zhou X-M.:Mater. Sci. Eng. C, 2012, 32, 2459.https://doi.org/10.1016/j.msec.2012.07.025 [112] Llorens E., Ibañez H., del Valle L., Puiggalí J.:Mater. Sci. Eng. C, 2015, 49, 472. https://doi.org/10.1016/j.msec.2015.01.039 [113] Zhao J., Wang X., Zeng J. et al.: J. Appl. Polym. Sci., 2005, 97,2273. https://doi.org/10.1002/app.22009 [114] Xu J., Guo B.: Biotechnol. J., 2010, 5, 1149.https://doi.org/10.1002/biot.201000136 [115] Ferreira L.,Moreira A., Pinto J., de Souza F.: Polym. Eng. Sci.,2015, 55, 1889. https://doi.org/10.1002/pen.24029 [116] Cho K., Lee J., Kwon K.: J. Appl. Polym. Sci., 2001, 79, 1025.https://doi.org/10.1002/1097-4628(20010207)79:6<1025::AIDAPP50>3.0.CO;2-7 [117] Gualandi C., SoccioM., Saino E. et al.: Soft Matter., 2012, 8,5466. https://doi.org/10.1039/c2sm25308a [118]Wang J., Ng C.,Win K. et al.: J. Microencapsul., 2003, 20, 317.https://doi.org/10.3109/02652040309178072 [119] Bahari K.,Mitomo H., Enjoji T. et al.: Polym. Degrad. Stab.,1998, 62, 551. https://doi.org/10.1016/S0141-3910(98)00041-X [120]Wu S., Zheng L., Li C. et al.: Polym. Chem., 2015, 6, 1495.https://doi.org/10.1039/C4PY01305K [121] Deepthi S., Viha C., Thitirat C. et al.: Polymers, 2014, 6, 2974.https://doi.org/10.3390/polym6122974 [122] Costa-Pinto A., Correlo V., Sol P. et al.: J. Tissue Eng. Regen. Med., 2012, 6, 21. https://doi.org/10.1002/term.391 [123] Niu Y., Cao L., Wei J. et al.: J. Mater. Chem. B, 2014, 2, 1174.https://doi.org/10.1039/c3tb21371d [124] Sutthiphong S., Pavasant P., Supaphol P.: Polymer, 2009, 50,1548. https://doi.org/10.1016/j.polymer.2009.01.042 [125]Wang H., Ji J., ZhangW. et al.: Acta Biomater., 2010, 6, 154.https://doi.org/10.1016/j.actbio.2009.07.026 [126]Wang H., Wang S., Liao Z. et al.: Int. J. Pharm., 2012, 430, 342.https://doi.org/10.1016/j.ijpharm.2012.04.009 [127]Wang H., Chang X., Qiu G. et al.: Int. J. Polym. Sci., 2014,2014, 153453. https://doi.org/10.1155/2014/153453 [128] Shishatskaya E., Goreva A., Kalacheva G., Volova T.: J. Biomater. Sci. Polym. Edn., 2011, 22, 2185.https://doi.org/10.1163/092050610X537138 [129]Mitra A., Wu Y.: Recent Pat. Drug Deliv. Formul., 2010, 4, 94.https://doi.org/10.2174/187221110791185024 [130] Kim S., Lim C-K., Na J. et al.: Chem. Commun., 2010, 46,1617. https://doi.org/10.1039/b923309a [131] deYoungM.,MacConell L., Sarin V. et al.:Diabetes Technol. Ther., 2011, 13, 1145. https://doi.org/10.1089/dia.2011.0050 [132] NguyenM., Lee D.:Macromol. Biosci., 2010, 10, 563.https://doi.org/10.1002/mabi.200900402 [133]Markovsky E., Baabur-Cohen H., Eldar-Boock A. et al.: J. Control. Release, 2012, 161, 446.https://doi.org/10.1016/j.jconrel.2011.12.021 [134] Sakata N., Aoki T., Yoshimatsu G. et al.:DiabetesMetab. Res. Rev., 2014, 30, 1. https://doi.org/10.1002/dmrr.2463 [135] Tian X.,Wei F., Wang T. et al.:Mater. Lett., 2012, 68, 94.https://doi.org/10.1016/j.matlet.2011.10.042 [136] Zhao X., Yao Y., Tian K. et al.: Eur. J. Pharm. Biopharm.,2016, 108, 91. https://doi.org/10.1016/j.ejpb.2016.08.018 [137] Jevševar S., KunsteljM., Porekar V.: Biotechnol. J., 2010, 5,113. https://doi.org/10.1002/biot.200900218 [138] Gautier J.,Munnier E., Paillard A. et al.: Int. J. Pharm., 2012,423, 16. https://doi.org/10.1016/j.ijpharm.2011.06.010 [139] Pasut G., Veronese F.: J. Control. Release, 2012, 161, 461.https://doi.org/10.1016/j.jconrel.2011.10.037 [140]Milla P., Dosio F., Cattel L.: Curr. DrugMetab., 2012, 13, 105.https://doi.org/10.2174/138920012798356934 [141] Valente I., Celasco E., Marchisio D., Barresi A.: Chem. Eng. Sci., 2012, 77, 217. https://doi.org/10.1016/j.ces.2012.02.050 [142] Zhao P., Wang H., YuM. et al.: Eur. J. Pharm. Biopharm.,2012, 81, 248. https://doi.org/10.1016/j.ejpb.2012.03.004 [143] Ogawara K., Furumoto K., Nagayama S. et al.: J. Control. Release, 2004, 100, 451. https://doi.org/10.1016/j.jconrel.2004.07.028 [144] Lu Y., Low P.: Adv. Drug Deliv. Rev., 2002, 54, 675.. [145] Kost J., Langer R.: Adv. Drug Deliv. Rev., 2012, 64, 327. [146] Elzoghby A., SamyW., ElgindyN.: J. Control. Release, 2012,157, 168. https://doi.org/10.1016/j.jconrel.2011.07.031 [147] Gormley A., Larson N., Sadekar S. et al.:Nano Today, 2012, 7,158. https://doi.org/10.1016/j.nantod.2012.04.002 [148] Liu Y., Li K., Pan J. et al.: Biomaterials, 2010, 31, 330.https://doi.org/10.1016/j.biomaterials.2009.09.036 [149] Fredholm B.: Exp. Cell Res., 2010, 316, 1284.https://doi.org/10.1016/j.yexcr.2010.02.004 [150] Kataoka K., Harada A., Nagasaki Y.:Nanopart. Syst. Improv. Drug Deliv., 2001, 47, 113. https://doi.org/10.1016/S0169-409X(00)00124-1 [151] Nishiyama N., Cabral H., Kataoka K.:Micellar Structures as Drug Delivery Systems. [in:] Kratz F., Senter P., Steinhagen H. (Eds.) Drug Delivery in Oncology: From Basic Research to Cancer Therapy. Wiley-VCH Verlag GmbH & Co. KgaA, Weinheim 2011, 1051–69.https://doi.org/10.1002/9783527634057.ch32 [152] Na X-M., Gao F., Zhang L-Y. et al.: ACSMacro Lett., 2012, 1,697. https://doi.org/10.1021/mz200222d [153] SinghM., Hemant K., Ram M., Shivakumar H.: Res. Pharm. Sci., 2011, 5, 65. [154] Szabó T., Molnár-Nagy L., Bognár J. et al.: Prog. Org. Coat.,2011, 72, 52. https://doi.org/10.1016/j.porgcoat.2011.03.014 [155] Nordstierna L., Abdalla A., NordinM., NydénM.: Prog. Org. Coat., 2010, 69, 49. https://doi.org/10.1016/j.porgcoat.2010.05.003 [156] Torchilin V.: J. Control. Release, 2001, 73, 137.https://doi.org/10.1016/S0168-3659(01)00299-1 [157] Zhang Y., Wei W., Lv P. et al.: Eur. J. Pharm. Biopharm., 2011,77, 11. https://doi.org/10.1016/j.ejpb.2010.09.016 [158] Jyothi N., Prasanna P., Sakarkar S. et al.: J.Microencapsul.,2010, 27, 187. https://doi.org/10.3109/02652040903131301 [159] ChangM-W., Stride E., Edirisinghe M.: Langmuir, 2010, 26,5115. https://doi.org/10.1021/la903592s [160]Ma Y., Zhang Y., ZhaoM. et al.: Chem. Commun., 2012, 48,6217. https://doi.org/10.1039/c2cc31932b [161]Mitragotri S., Burke P., Langer R.:Nat. Rev. Drug Discov.,2014, 13, 655. https://doi.org/10.1038/nrd4363 [162] Patel B., Gupta V., Ahsan F.: J. Control. Release, 2012, 162,310. https://doi.org/10.1016/j.jconrel.2012.07.003 [163] NatuM., de Sousa H., GilM.: Int. J. Pharm., 2010, 397, 50.https://doi.org/10.1016/j.ijpharm.2010.06.045 [164] Nguyen T., Ghosh C., Hwang S-G. et al.: Int. J. Pharm., 2012,439, 296. https://doi.org/10.1016/j.ijpharm.2012.09.019 [165] Kang X., Cheng Z., Yang D. et al.: Adv. Funct. Mater., 2012,22, 1470. https://doi.org/10.1002/adfm.201102746 [166] Berchane N., Carson K., Rice-Ficht A., AndrewsM.: Int. J. Pharm., 2007, 337, 118. https://doi.org/10.1016/j.ijpharm.2006.12.037 [167] KobiasiM., Chua B., Tonkin D. et al.: J. Biomed. Mater. Res.A, 2012, 100A, 1859. https://doi.org/10.1002/jbm.a.34153 [168] Arnida, Janát-AmsburyM., RayA. et al.: Eur. J. Pharm. Biopharm., 2011, 77, 417. https://doi.org/10.1016/j.ejpb.2010.11.010 [169] SilvaM.,Winkler Hechenleitner A., de Oliveira D. et al.: Eur. J. Pharm. Sci., 2013, 49, 343. https://doi.org/10.1016/j.ejps.2013.04.006 [170]Mout R.,Moyano D., Rana S., Rotello V.: Chem. Soc. Rev.2012, 41, 2539. https://doi.org/10.1039/c2cs15294k [171] Du J-Z., Du X-J.,Mao C-Q., Wang J.: J. Am. Chem. Soc.,2011, 133, 17560. https://doi.org/10.1021/ja207150n [172] Tabatabaei Rezaei S., NabidM., Niknejad H., Entezami A.: Polymer, 2012, 53, 3485.https://doi.org/10.1016/j.polymer.2012.05.056 [173] Choi K., Chung H.,Min K. et al.: Biomaterials, 2010, 31, 106.https://doi.org/10.1016/j.biomaterials.2009.09.030 [174] Yoo J-W., Doshi N.,Mitragotri S.: Adv. Drug Deliv. Rev.,2011, 63, 1247. https://doi.org/10.1016/j.addr.2011.05.004 [175] Sharma G., Valenta D., Altman Y. et al.: J. Control. Release,2010, 147, 408. https://doi.org/10.1016/j.jconrel.2010.07.116 [176] Venkataraman S., Hedrick J., Ong Z. et al.: Adv. Drug Deliv. Rev., 2011, 63, 1228. https://doi.org/10.1016/j.addr.2011.06.016 [177] Champion J., Katare Y.,Mitragotri S.: J. Control. Release,2007, 121, 3. https://doi.org/10.1016/j.jconrel.2007.03.022 [178] Tomic I., Vidis-Millward A., Mueller-ZsigmondyM., Cardot JM.: Int. J. Pharm., 2016, 505, 42.https://doi.org/10.1016/j.ijpharm.2016.03.048 [179] Brunner C., Baran E., Pinho E. et al.: Colloids Surf. B, 2011, 84,498. https://doi.org/10.1016/j.colsurfb.2011.02.005 [180] Dalmoro A., Lamberti G., Titomanlio G. et al.: AAPS Pharm. Sci.Tech., 2010, 11, 1500. https://doi.org/10.1208/s12249-010-9528-3 [181]Ma G.: J. Control. Release, 2014, 193, 324.https://doi.org/10.1016/j.jconrel.2014.09.003 [182] Tonon R., Grosso C., HubingerM.: Food Res. Int., 2011, 44,282. https://doi.org/10.1016/j.foodres.2010.10.018 [183] Rokka S., Rantamäki P.: Eur. Food Res. Technol., 2010, 231, 1.https://doi.org/10.1007/s00217-010-1246-2 [184] Bosnea L., Moschakis T., Biliaderis C.: Food Bioprocess. Technol., 2014, 7, 2767. https://doi.org/10.1007/s11947-014-1317-7 [185] Li M., Rouaud O., Poncelet D.: Int. J. Pharm., 2008, 363, 26.https://doi.org/10.1016/j.ijpharm.2008.07.018 [186] DelgadoM., Lázaro A., Mazo J., Zalba B.: Renew Sustain EnergyRev., 2012, 16, 253. https://doi.org/10.1016/j.rser.2011.07.152 [187] ZhuM., Shi J., He Q. et al.: J. Mater. Sci., 2012, 47, 2256.https://doi.org/10.1007/s10853-011-6037-z [188] Lee S.,McClements D.: Food Hydrocoll., 2010, 24, 560.https://doi.org/10.1016/j.foodhyd.2010.02.002 [189] Hung L-H., Teh S-Y., Jester J., Lee A.: Lab. Chip., 2010, 10,1820. https://doi.org/10.1039/c002866e [190] Staff R., Schaeffel D., Turshatov A. et al.: Small, 2013, 9, 3514.https://doi.org/10.1002/smll.201300372 [191]Webster D., Sundaram P., ByrneM.: Eur. J. Pharm. Biopharm.,2013, 84, 1. https://doi.org/10.1016/j.ejpb.2012.12.009 [192] Nath S., Son S., Sadiasa A. et al.: Int. J. Pharm., 2013, 443, 87.https://doi.org/10.1016/j.ijpharm.2012.12.037 [193] Hao S., Wang Y.,Wang B. et al.:Mater. Sci. Eng. C, 2013, 33,4562. https://doi.org/10.1016/j.msec.2013.07.009 [194] Lee Y-H., Mei F., BaiM-Y. et al.: J. Control. Release, 2010,145, 58. https://doi.org/10.1016/j.jconrel.2010.03.014 [195] Patil Y., Swaminathan S., Sadhukha T. et al.: Biomaterials,2010, 31, 358. https://doi.org/10.1016/j.biomaterials.2009.09.048 [196] Sridhar R., Ramakrishna S.: Biomatter., 2013, 3, e24281.https://doi.org/10.4161/biom.24281. [197] Almería B., Fahmy T., Gomez A.: J. Control. Release, 2011,154, 203. https://doi.org/10.1016/j.jconrel.2011.05.018 [198] Almería B., DengW., Fahmy T., Gomez A.: J. Colloid Interf. Sci., 2010, 343, 125. https://doi.org/10.1016/j.jcis.2009.10.002 [199] Almería B., Gomez A.: J. Colloid Interf. Sci., 2014, 417, 121.https://doi.org/10.1016/j.jcis.2013.11.037 [200] Bock N., WoodruffM., Hutmacher D., Dargaville T.: Polymers,2011, 3, 131. https://doi.org/10.3390/polym3010131 [201]Malik S., NgW., Bowen J. et al.: J. Colloid Interf. Sci., 2016,467, 220. https://doi.org/10.1016/j.jcis.2016.01.021 [202] Gert N., Fabian S., Twan K. ET AL.: Int. J. Pharm., 2016, 499,358. https://doi.org/10.1016/j.ijpharm.2016.01.020 [203] Zhang K., WuW., Guo K. et al.: Colloid. Surface Physicochem. Eng. Asp., 2009 349, 110.https://doi.org/10.1016/j.colsurfa.2009.08.005 [204] Javadzadeh Y., Ahadi F., Davaran S. et al.: Colloid. Surface B,2010, 81, 498. https://doi.org/10.1016/j.colsurfb.2010.07.047 [205] Paillard-Giteau A., Tran V., Thomas O. et al.: Eur. J. Pharm. Biopharm., 2010, 75, 128. https://doi.org/10.1016/j.ejpb.2010.03.005 [206] Luciani A., Coccoli V., Orsi S. et al.: Biomaterials, 2008, 29,4800. https://doi.org/10.1016/j.biomaterials.2008.09.007 [207] Liu X., KaminskiM., Riffle J. et al.: J. Magn. Magn.Mater.,2007, 311, 84. https://doi.org/10.1016/j.jmmm.2006.10.1170 [208] Rosca I., Watari F., UoM.: J. Control. Release, 2004, 99, 271.https://doi.org/10.1016/j.jconrel.2004.07.007 [209] Barichello J.,MorishitaM., Takayama K., Nagai T.:Drug Dev. Ind. Pharm., 1999, 25, 471. https://doi.org/10.1081/DDC-100102197 [210] Giunchedi P., Conte U., Alpar H.: J.Microencapsul., 1998, 15,185. https://doi.org/10.3109/02652049809006848 [211] Kim C., Ghosh P., Pagliuca C. et al.: J. Am. Chem. Soc., 2009,131, 1360. https://doi.org/10.1021/ja808137c [212]Wischke C., Schwendeman S.: Int. J. Pharm., 2008, 364, 298.https://doi.org/10.1016/j.ijpharm.2008.04.042 [213] Lee T., Wang J., Wang C.: J. Control. Release, 2002, 83, 437.https://doi.org/10.1016/S0168-3659(02)00235-3 [214] Pinon-Segundo E., Nava-ArzaluzM., Lechuga-Ballesteros D.: Recent Pat. Drug Deliv. Formul., 2012 6, 224.https://doi.org/10.2174/187221112802652606 [215] Lee S.,McClements D.: Food Hydrocoll., 2010, 24, 560. https://doi.org/10.1016/j.foodhyd.2010.02.002 [216] AyoubM., Ahmed N., Kalaji N. et al.: J. Biomed. Nanotechnol., 2011, 7, 255. https://doi.org/10.1166/jbn.2011.1279 [217]Medeiros A.,Machado F., Rubim J.,McKenna T.: J. Polym. Sci. A, 2017, 55, 1422. https://doi.org/10.1002/pola.28511 [218]Machado F., Lima E., Pinto J.: Polym. Eng. Sci., 2010, 50, 697.https://doi.org/10.1002/pen.21572 [219] Araujo R., Ferreira G., Segura T. et al.: Eur. Polym. J., 2015, 68,441. https://doi.org/10.1016/j.eurpolymj.2015.05.015 [220] Jensen A., Sayer C., Araújo P.,Machado F.: Eur. J. Lipid Sci. Technol., 2014, 116, 37. https://doi.org/10.1002/ejlt.201300212 [221] Jensen A., de Oliveira A., Gonçalves S. et al.: J Appl Polym Sci.2016, 133. https://doi.org/10.1002/app.44129 [222] Neves J., Valadares L.,Machado F.: Curr. Appl. Polym. Sci.,2017, 1, 79. https://doi.org/10.2174/2452271601666170221124329 [223] Soares M.,Machado F., Guimarães A. et al.: Polym. Eng. Sci.,2011, 51, 1919. https://doi.org/10.1002/pen.22002 [224] Freitas S.,Merkle H., Gander B.: J. Control. Release, 2005, 102,313. https://doi.org/10.1016/j.jconrel.2004.10.015 [225]Machado F., Lima E., Pinto J.: Polímeros, 2007, 17, 166.https://doi.org/10.1590/S0104-14282007000200016 [226] Peng Z., Li S., Han X. et al.: Anal. Chim. Acta, 2016, 937, 113.https://doi.org/10.1016/j.aca.2016.08.014 [227] Ramazani F., ChenW., van Nostrum C. et al.: Int. J. Pharm.,2016, 499, 358. https://doi.org/10.1016/j.ijpharm.2016.01.020 [228] Katou H., Wandrey A., Gander B.: Int. J. Pharm., 2008, 364, 45.https://doi.org/10.1016/j.ijpharm.2008.08.015 [229] Qi F., Wu J., Fan Q. et al.: Colloid. Surface B, 2013, 112, 492.https://doi.org/10.1016/j.colsurfb.2013.08.048 [230] Yunoki A., Tsuchiya E., Fukui Y. et al.: ACS Appl. Mater. Interfaces, 2014, 6, 11973. https://doi.org/10.1021/am503030c [231] Park S., Lee Y., Hong S.: Colloid. Surface B, 2006, 47, 211.https://doi.org/10.1016/j.colsurfb.2005.12.001 [232] Crucho C., BarrosM.: Polymer, 2015, 68, 41.https://doi.org/10.1016/j.polymer.2015.04.083 [233] Ruger M., Hohmann S., SommerfeldM., Kohnen G.: At. Sprays, 2000, 10, 30. https://doi.org/10.1615/AtomizSpr.v10.i1.30 [234] Faure A., York P., Rowe R.: Eur. J. Pharm. Biopharm., 2001,52, 269. https://doi.org/10.1016/S0939-6411(01)00184-9 [235] Zastre J., Jackson J., Burt H.: Pharm. Res., 2004, 21, 1489.https://doi.org/10.1023/B:PHAM.0000036925.45002.a2 [236] Huang P., Wang D., Su Y. et al.: J. Am. Chem. Soc., 2014, 136,11748. https://doi.org/10.1021/ja505212y [237] Djordjevic L., PrimoracM., StuparM., Krajisnik D.: Int. J. Pharm., 2004, 271, 11. https://doi.org/10.1016/j.ijpharm.2003.10.037 [238]Mayya K., Bhattacharyya A., Argillier J-F.: Polym. Int., 2003,52, 644. https://doi.org/10.1002/pi.1125 [239]Wang X., Danoff E., Sinkov N. et al.: Langmuir, 2006, 22,6461. https://doi.org/10.1021/la0605135 [240] Uchegbu I., Vyas S.: Int. J. Pharm., 1998, 172, 33.https://doi.org/10.1016/S0378-5173(98)00169-0 [241] Rosa G., Iommelli R., La RotondaM. et al.: J. Control. Release,2000, 69, 283. https://doi.org/10.1016/S0168-3659(00)00315-1 [242] Yeo Y., Park K.: Arch. Pharm. Res., 2004, 27, 1.https://doi.org/10.1007/BF02980037 [243] Zhang Y., Wischke C.,Mittal S. et al.:Mol. Pharm., 2016, 13,2622. https://doi.org/10.1021/acs.molpharmaceut.5b00961 [244] Jagdale S., Pawar S.: Adv. Pharm. Bull., 2017, 7, 229.https://doi.org/10.15171/apb.2017.028 [245] Haider M., Ranjha N., BakhtM. et al.: Lat. Am. J. Pharm.,2017, 36, 281. [246] Calderó G.,Montes R., LlinàsM. et al.: Colloid. Surface B,2016, 145, 922. https://doi.org/10.1016/j.colsurfb.2016.06.013 [247]Marto J., Gouveia L., Jorge I. et al.: Colloid Surface B, 2015,135, 183. https://doi.org/10.1016/j.colsurfb.2015.07.024 [248] Bulut E.: Artif. Cells Nanomed. Biotechnol., 2016, 44, 1482. https://doi.org/10.3109/21691401.2015.1042109 [249] Yi T., Liu C., Zhang J. et al.: Eur. J. Pharm. Sci., 2017, 96, 420. https://doi.org/10.1016/j.ejps.2016.08.047 [250]Monaco G., Cholas R., Salvatore L. et al.:Mater. Sci. Eng. C.,2017, 71, 335. https://doi.org/10.1016/j.msec.2016.10.030 [251] Lyons D., Mendenhall S., NeumeisterM. et al.: Plast. Reconstr. Surg. Glob. Open, 2016, 4, e823.https://doi.org/10.1097/GOX.0000000000000819 [252] Sakar F., Özer A., Erdogan S. et al.: Pharm. Dev. Technol.,2017, 22, 775. https://doi.org/10.3109/10837450.2016.1163393 [253] Yaman A.: Curr. Opin. Drug Discov. Devel., 2001, 4, 760. [254] Sommerfeld P., Schroeder U., Sabel B.: Int. J. Pharm., 1998,164, 113. https://doi.org/10.1016/S0378-5173(97)00394-3 [255] Kroeze R., HelderM., RoosW. et al.:Acta Biomater., 2010, 6,2060. https://doi.org/10.1016/j.actbio.2009.11.022 [256]Mendes G., Brandão T., Silva C.: Am. J. Infect. Control., 2007,35, 574. https://doi.org/10.1016/j.ajic.2006.10.014 [257] Zajko Š., Klimant I.: Sensor. Actuat. B-Chem., 2013, 177, 86.https://doi.org/10.1016/j.snb.2012.10.040 [258] SavarisM., Carvalho G., Falavigna A. et al.:Mater. Res., 2016,19, 807. https://doi.org/10.1590/1980-5373-MR-2015-0200 [259]Wilson A., Nayak S.: Anesth. Intense. Care Medicine, 2016, 17,475. http://dx.doi.org/10.1016/j.mpaic.2016.07.002 [260] Rediguieri C., Sassonia R., Dua K. et al.: Eur. Polym. J., 2016,82, 181. https://doi.org/10.1016/j.eurpolymj.2016.07.016 [261] Uguz I., GanjiM., Hama A. et al.: Adv. Healthc. Mater., 2016,5, 3094. https://doi.org/10.1002/adhm.201600870 [262] Yilmaz B., L’Homme-Langlois E., Beck F.M,McGlumphy E.: J. Prosthet. Dent., 2016, 115, 718.https://doi.org/10.1016/j.prosdent.2015.11.001 [263] RogersW.: Steam and DryHeat Sterilization of Biomaterials and Medical Devices. [in:] Lerouge S., Simmons A. (Eds.), Sterilisation of Biomaterials andMedical Devices. Woodhead Publishing, Cambridge 2012, 20-55. [264] RogersW.: Sterilisation Techniques for Polymers. [in:] Lerouge S., Simmons A. (Eds.), Sterilisation of Biomaterials andMedical Devices. Woodhead Publishing, Cambridge 2012, 151-211. [265] Sandle T.: Sterility, Sterilisation and SterilityAssurance for Pharmaceuticals. Woodhead Publishing, Cambridge 2013, ch. 7, 93-99. [266] Bilensoy E., Hincal A.: Cyclodextrin-Based Nanomaterials in Pharmaceutical Field. [in:] Gad S. (Ed.), Pharmaceutical Sciences Encyclopedia. JohnWiley& Sons Inc., Hoboken 2010, 1-23.https://doi.org/10.1002/9780470571224.pse370 [267] Kotha S., Ramakrishnaiah R., Devang Divakar D. et al. J. Investig. Clin. Dent., 2016. https://doi.oeg/10.1111/jicd.12244. [268] Godefroid S., Vyver A., Stoffelen P., Vanderborght T.: Plant Biosystems, 2017, 151, 1054. https://doi.org/10.1080/11263504.2016.1231140 [269] Sandle T.: Sterility, Sterilisation and SterilityAssurance for Pharmaceuticals. Woodhead Publishing, Cambridge 2013, ch.10, 143-55. [270] Konan Y., GurnyR., Allémann E.: Int. J. Pharm., 2002, 233,239. https://doi.org/10.1016/S0378-5173(01)00944-9 [271] Li L., Mak K., Shi J. et al.:Microelectron. Eng., 2013, 111, 310.https://doi.org/10.1016/j.mee.2013.02.021 [272] Dobrovolskaia M.,McNeil S. (Eds.):Handbook of Immunological Properties of Engineered NanomaterialsWorld Scientific Publishing Co, New Jersey 2016. [273] Rai R., TallawiM., Roether J. et al.:Mater. Lett., 2013, 105, 32.https://doi.org/10.1016/j.matlet.2013.04.024 [274] Dearth C., Keane T., Carruthers C. et al.: Acta Biomater., 2016,33, 78. https://doi.org/10.1016/j.actbio.2016.01.038 [275] Fan X., Sokorai K., Weidauer A. et al.: Radiat. Phys. Chem.,2017, 130, 306. https://doi.org/10.1016/j.radphyschem.2016.09.015 [276] Mrázová H., Koller J., Kubišová K. et al.: Cell Tissue Bank.,2016, 17, 255. https://doi.org/10.1007/s10561-015-9536-3 [277] Bhatnagar D., Dube K., Damodaran V. et al.:Macromol. Mater. Eng., 2016, 301, 1211. https://doi.org/10.1002/mame.201600133 [278] Sefat F.,McKean R., Deshpande P. et al.: Procedia Eng., 2013,59, 101. https://doi.org/10.1016/j.proeng.2013.05.099 [279]Wang J., Chu L.: Radiat. Phys. Chem., 2016, 125, 56.https://doi.org/10.1016/j.radphyschem.2016.03.012 [280] Zembouai I., Kaci M., Bruzaud S. et al.: Polym. Degrad. Stab.,2016, 132, 117.https://doi.org/10.1016/j.polymdegradstab.2016.03.019 [281] SuhartiniM.,Mitomo H., Nagasawa N. et al.: J. Appl. Polym. Sci., 2003, 88, 2238. https://doi.org/10.1002/app.11944 [282] Croonenborghs B., SmithM., Strain P.: Radiat. Phys. Chem.,2007, 76, 1676. https://doi.org/10.1016/j.radphyschem.2007.01.014 [283]Memisoglu-Bilensoy E., Hincal A.: Int. J. Pharm., 2006, 311,203. https://doi.org/10.1016/j.ijpharm.2005.12.013 [284] Valente T., Silva D., Gomes P. et al.: ACS Appl. Mater. Interfaces, 2016, 8, 3241. https://doi.org/10.1021/acsami.5b10869 [285] Chmielewski A., Haji-SaeidM., Ahmed S.:Nucl. Instrum. Meth B, 2005, 236, 44. https://doi.org/10.1016/j.nimb.2005.03.247 [286] Ražem D., Katušin-Ražem B.: Radiat. Phys. Chem., 2008, 77,288. https://doi.org/10.1016/j.radphyschem.2007.06.006 [287] Ito H., IslamM.: Radiat. Phys. Chem., 1994, 43, 545.https://doi.org/10.1016/0969-806X(94)90165-1 [288] Loo SCJ, Tan HT, Ooi CP, BoeyYCF. Hydrolytic degradation of electron beam irradiated high molecular weight and non-irradiated moderate molecular weight PLLA. Acta Biomater. 2006;2:287–96.https://doi.org/10.1016/j.actbio.2005.10.003 [289] CairnsM-L., Dickson G., Orr J. et al.: Polym. Degrad. Stab.,2011, 96, 76. https://doi.org/10.1016/j.polymdegradstab.2010.10.016 [290] IAEA. Trends in Radiation Sterilization of Health Care Products. 2008. http://wwwpub.iaea.org/books/IAEABooks/7691/Trends-in-Radiation-Sterilization-of-Health-Care-Products. Accessed 4 Sep 2017. [291]Mazor E., ZilbermanM.: Polym. Adv. Technol., 2017, 28, 565.https://doi.org/10.1002/pat.4054 [292] Ghafoor B., MehmoodM., Shahid U. et al.: Radiat. Phys. Chem., 2016, 125, 145.https://doi.org/10.1016/j.radphyschem.2016.04.004 [293] Gaston F., DupuyN., Marque S. et al.: Radiat. Phys. Chem.,2016, 125, 115. https://doi.org/10.1016/j.radphyschem.2016.03.010 [294] ZhaoW., Lu Y., Zhou L. et al.: J.Mater. Sci., 2016, 51, 7073.https://doi.org/10.1007/s10853-016-9875-x [295] Šarac T., QuiévyN., Gusarov A., KonstantinovićM.: Radiat. Phys. Chem., 2016, 125, 151.https://doi.org/10.1016/j.radphyschem.2016.03.024 [296] Jo S-Y., Park J-S., Gwon H-J. et al.: Radiat. Phys. Chem., 2012,81, 846. https://doi.org/10.1016/j.radphyschem.2012.03.013 [297] Urbanek O., Pierini F., Choińska E. et al.: Polym. Compos.,2016, https://doi.org/10.1002/pc.24028 [298] Dai Y., Xia Y., Chen H-B. et al.: J. Bioact. Compat. Polym. Biomed. Appl., 2016, 31, 152.https://doi.org/10.1177/0883911515598795 [299] Zembouai I., Kaci M., Bruzaud S. et al.: Polym. Test., 2016, 49,29. https://doi.org/10.1016/j.polymertesting.2015.11.003 [300] Escudero-Castellanos A., Ocampo-García B., Domínguez- García M. et al.: J.Mater. Sci.Mater.Med., 2016, 27, 176.https://doi.org/10.1007/s10856-016-5793-3 [301] Dai Z., Ronholm J., Tian Y. et al.: J. Tissue Eng., 2016, 7,2041731416648810. https://doi.org/10.1177/2041731416648810 [302] Song C., Yoshii F., Kume T.: J. Macromol. Sci. A, 2001, 38,961. https://doi.org/10.1081/MA-100104947 [303] Song J., RenM., Song C. et al.: Polym. Int., 2004, 53, 1773.https://doi.org/10.1002/pi.1579 [304] Khan R., Dussault D., Salmieri S. et al.: J. Appl. Polym. Sci.,2013, 127, 3962. https://doi.org/10.1002/app.37715 [305] Augustine R., Saha A., Jayachandran V. et al.: Int. J. Polym. Mater. Polym. Biomater., 2015, 4, 526.https://doi.org/10.1080/00914037.2014.977900 [306] Luk J., Cooper-White J., Rintoul L. et al.: J. Mater. Chem. B,2013, 1, 4171. https://doi.org/10.1039/c3tb20267d [307] Jeong J-O., Jeong S., Shin Y. et al.: Polym. Korea, 2015, 39,418. https://doi.org/10.7317/pk.2015.39.3.418 [308] Keles H., Naylor A., Clegg F., Sammon C.: Polym. Degrad. Stab., 2015, 119, 228.https://doi.org/10.1016/j.polymdegradstab.2015.04.025 [309]Martı́nez-Sancho C., Herrero-Vanrell R., Negro S.: J. Control. Release, 2004, 99, 41. https://doi.org/10.1016/j.jconrel.2004.06.004 [310] SimpsonM., Gilmore B.,Miller A. et al.: Rad. Phys. Chem.,2014, 94, 211. https://doi.org/10.1016/j.radphyschem.2013.09.002 [311] Chakoli A., He J., ChayjanM. et al.: RSC Adv., 2015, 5, 55544.https://doi.org/10.1039/C5RA08319B [312] Shahabi S., Najafi F.,Majdabadi A. et al.: Sci. World J., 2014,2014, e420616. https://doi.org/10.1155/2014/420616 [313] Oliveira L., Araujo P., Araujo E.:Mater. Res., 2013, 16, 195.https://doi.org/10.1590/S1516-14392012005000173 [314] Khalil A., AlbachirM., Odeh A.: Polycycl. Aromat. Compd.,2016, 36, 873. https://doi.org/10.1080/10406638.2015.1042551 [315] Liu Y., Zhai Y., CaoW. et al.:MATECWeb Conf., 2016, 67,01004. https://doi.org/10.1051/matecconf/20166701004 [316] IgartuaM., Hernández R., Rosas J. et al.: Eur. J. Pharm. Biopharm., 2008, 69, 519. https://doi.org/10.1016/j.ejpb.2007.12.014 [317] Desai K-GH., Kadous S., Schwendeman S.: Pharm. Res., 2013,30, 1768. https://doi.org/10.1007/s11095-013-1019-2 [318] Fernandes-Cunha G., Rezende C.,MusselW. et al: J. Mater. Sci. Mater.Med., 2016, 27, 10. https://doi.org/10.1007/s10856-015-5621-1 [319] Bozdag S., Su H.: Il. Farm., 2002, 57, 55.https://doi.org/10.1016/S0014-827X(01)01171-5 [320] Ninaya Z., Hamid Z., Ahmad Z. et al.: Procedia Chem., 2016,19, 373. https://doi.org/10.1016/j.proche.2016.03.026 [321] Erdemli Ö., Usanmaz A., Keskin D., Tezcaner A.: Colloid. Surface B, 2014, 117, 487.https://doi.org/10.1016/j.colsurfb.2014.01.037 [322] Keles H., Naylor A., Clegg F., Sammon C.:Vib. Spectrosc.,2014, 71, 76. https://doi.org/10.1016/j.vibspec.2014.01.012 [323] Thomarayil Mathew S., Devi Subbiah G., Viswanadhan Vasantha P., Balan V.: Curr. Drug Deliv., 2013, 10, 158.https://doi.org/10.2174/1567201811310020002 [324]Mohanan D., Gander B., Kündig T., Johansen P.: Eur. J. Pharm. Biopharm., 2012, 80, 274. https://doi.org/10.1016/j.ejpb.2011.10.007 [325] Sarigöl E., Pehlivan S., EkizoğluM. et al.: Pharm. Dev. Technol., 2017, 22, 706.https://doi.org/10.3109/10837450.2015.1102280 [326] Checa-Casalengua P., Jiang C., Bravo-Osuna I. et al.: Int. J. Pharm., 2012, 436, 545. https://doi.org/10.1016/j.ijpharm.2012.07.019 [327] Erdemli Ö., Keskin D., Tezcaner A.:Mater. Sci. Eng. C, 2015,48, 391. https://doi.org/10.1016/j.msec.2014.12.044 [328] Dorati R., Genta I.,Montanari L. et al.: J. Control. Release,2005, 107, 78. https://doi.org/10.1016/j.jconrel.2005.05.029 [329] IgartuaM., Hernández R., Rosas J. et al.: Eur. J. Pharm. Biopharm., 2008, 69, 519. https://doi.org/10.1016/j.ejpb.2007.12.014 [330] Selmin F., Puoci F., Parisi O. et al.: J. Funct. Biomater., 2015, 6,1. https://doi.org/10.3390/jfb6010001 [331] Rajawat G., Shinde U., Nair H.: J. Drug Deliv. Sci. Technol.,2016, 35, 333. https://doi.org/10.1016/j.jddst.2016.08.006 [1] Kolesnyk I., Konovalova V., Burban A., Chem. Chem. Technol.,2015, 9, 485. https://doi.org/10.23939/chcht09.04.485 [2] Liu Y., Wang Y., Zhuang D. et al., J. Colloid Interf. Sci., 2012,377, 197. https://doi.org/10.1016/j.jcis.2012.04.004 [3] Nguyen C., Tran T., Lu X., Kasi R., Polym. Chem., 2014, 5, 2774.https://doi.org/10.1039/P.3PY01636F [4] Jain K., Current Status and Future Prospects of Drug Delivery Systems. [in:] Jain K. (Ed.), Drug Delivery System. Springer, New York 2014, 1-56. https://doi.org/10.1007/978-1-4939-0363-4_1 [5] Sun D., Zhuang X., Xiang X. et al.:Mol. Ther., 2010, 18, 1606.https://doi.org/10.1038/mt.2010.105 [6]Weiser J., SaltzmanW., J. Control. Release, 2014, 190, 664.https://doi.org/10.1016/j.jconrel.2014.04.048 [7] Ye F., Guo H., Zhang H., He X.:Acta Biomater., 2010, 6, 2212. https://doi.org/10.1016/j.actbio.2009.12.014 [8] Ajazuddin, Saraf S., Fitoterapia, 2010, 81, 680.https://doi.org/10.1016/j.fitote.2010.05.001 [9] Xin H., Jiang X., Gu J. et al., Biomaterials, 2011, 32, 4293.https://doi.org/10.1016/j.biomaterials.2011.02.044 [10] Gong J., ChenM., Zheng Y. et al., J. Control. Release, 2012,159, 312. https://doi.org/10.1016/j.jconrel.2011.12.012 [11] Ford Versypt A., Pack D., Braatz R., J. Control. Release, 2013,165, 29. https://doi.org/10.1016/j.jconrel.2012.10.015 [12] Lee J., Oh Y., Lee S., Lee K., J. Control. Release, 2010, 146, 61.https://doi.org/10.1016/j.jconrel.2010.05.026 [13] Bohr A., Kristensen J., Stride E. et al., Int. J. Pharm., 2011, 412,59. https://doi.org/10.1016/j.ijpharm.2011.04.005 [14] Rodríguez Villanueva J., Bravo-Osuna I., Herrero-Vanrell R. et al., Eur. J. Pharm. Sci., 2016, 92, 287.https://doi.org/10.1016/j.ejps.2016.03.012 [15] Yang X., Chen L., Han B. et al., Polymer, 2010, 51, 2533.https://doi.org/10.1016/j.polymer.2010.04.032 [16] Hirota K., Hasegawa T., Nakajima T. et al., J. Control. Release,2010, 142, 339. https://doi.org/10.1016/j.jconrel.2009.11.020 [17] Tasker A., Hitchcock J., He L. et al., J. Colloid Interf. Sci., 2016,484, 10. https://doi.org/10.1016/j.jcis.2016.08.058 [18] Zelikin A., Price A., Städler B., Small, 2010, 6, 2201.https://doi.org/10.1002/smll.201000765 [19]Wang Y., Yan Y., Cui J. et al., Adv. Mater., 2010, 22, 4293.https://doi.org/10.1002/adma.201001497 [20] Koker S., Hoogenboom R., Geest B., Chem. Soc. Rev., 2012, 41,2867. https://doi.org/10.1039/P.2cs15296g [21] De Cock L., De Koker S., De Geest B., et al., Angew. Chem. Int. Edit., 2010, 49, 6954. https://doi.org/10.1002/anie.200906266 [22] DelceaM., Möhwald H., Skirtach A., Adv. Drug Deliv. Rev.,2011, 63, 730. https://doi.org/10.1016/j.addr.2011.03.010 [23] Shaikh J., Ankola D., Beniwal V. et al., Eur. J. Pharm. Sci., 2009,37, 223. https://doi.org/10.1016/j.ejps.2009.02.019 [24] Gao F., Zhang Z., Bu H. et al., J. Control. Release, 2011, 149,168. https://doi.org/10.1016/j.jconrel.2010.10.013 [25] Cai Z.,Wang Y., Zhu L-J., Liu Z-Q., Curr. DrugMetab., 2010,11, 197. https://doi.org/10.2174/138920010791110836 [26] Xie X., Tao Q., Zou Y. et al., J. Agric. Food Chem., 2011, 59,9280. https://doi.org/10.1021/jf202135j [27] Ensign L., Cone R., Hanes J., Adv. Drug Deliv. Rev., 2012, 64,557. https://doi.org/10.1016/j.addr.2011.12.009 [28] das Neves J., Nunes R.,Machado A., Sarmento B.:Vaginal Drug Deliv., 2015, 92, 53. https://doi.org/10.1016/j.addr.2014.12.004 [29] Gaucher G., Satturwar P., JonesM-C. et al., Eur. J. Pharm. Biopharm., 2010, 76, 147. https://doi.org/10.1016/j.ejpb.2010.06.007 [30]Mahajan H., Tatiya B., Nerkar P., Powder Technol., 2012, 221,168. https://doi.org/10.1016/j.powtec.2011.12.063 [31] Perioli L., Pagano C., Colloid. Surface B, 2013, 102, 915.https://doi.org/10.1016/j.colsurfb.2012.10.001 [32]Mahapatro A., Singh D., J. Nanobiotechnol., 2011, 9, 55.https://doi.org/10.1186/1477-3155-9-55 [33] Plapied L., Duhem N., des Rieux A., Préat V., Curr. Opin. Colloid. Interf. Sci., 2011, 16, 228.https://doi.org/10.1016/j.cocis.2010.12.005 [34]Wang X-Q., Zhang Q., Eur. J. Pharm. Biopharm., 2012, 82, 219.https://doi.org/10.1016/j.ejpb.2012.07.014 [35] Djupesland P.:Drug Deliv. Transl. Res., 2013, 3, 42.https://doi.org/10.1007/s13346-012-0108-9 [36] Singh AK., Singh A., Madhv N., J. Drug Deliv. Ther., 2012, 2,22. https://doi.org/10.22270/jddt.v2i3.163 [37] Gupta S., Gabrani R., Ali J., Dang S., Recent Pat. Drug Deliv. Formul., 2011, 5, 82. https://doi.org/10.2174/187221111795471418 [38] Abruzzo A., Bigucci F., Cerchiara T. et al., Carbohydr. Polym.,2013, 91, 651. https://doi.org/10.1016/j.carbpol.2012.08.074 [39] Pereira R., BruschiM.:Drug Dev. Ind. Pharm., 2012, 38, 643.https://doi.org/10.3109/03639045.2011.623355 [40] Fernández-Carballido A., Puebla P., Herrero-Vanrell R., Pastoriza P., Int. J. Pharm., 2006, 313, 129.https://doi.org/10.1016/j.ijpharm.2006.01.034 [41] The United States Pharmacopeial Convention. United Book Press, Baltimore 2013, 71-74; 1141-1145. [42] Téllez S., Casimiro R., Vela A. et al.:Vaccine, 2006, 24, 1710.https://doi.org/10.1016/j.vaccine.2005.12.037 [43] Parveen S., Kaur S., David S. et al.:Vaccine, 2011, 29, 8012.https://doi.org/10.1016/j.vaccine.2011.08.055 [44] TanM., Ren Y., Yan D. et al., J. Therm. Anal. Calorim., 2011,109, 1069. https://doi.org/10.1007/s10973-011-1804-2 [45] Hsiao C-Y., Liu S-J.,Wen-Neng Ueng S., Chan E-C., Polym. Degrad. Stab., 2012, 97, 715.https://doi.org/10.1016/j.polymdegradstab.2012.02.015 [46] SavarisM., Santos V., Brandalise R.:Mater. Sci. Eng. C, 2016,69, 661. https://doi.org/10.1016/j.msec.2016.07.031 [47] França R., Mbeh D., Samani T. et al., J. Biomed. Mater. Res. B,2013, 101, 1444. https://doi.org/10.1002/jbm.b.32964 [48] RutalaW.,Weber D., Am. J. Infect. Control., 2013, 41, S2.https://doi.org/10.1016/j.ajic.2012.11.005. [49] Asasutjarit R., Theerachayanan T., Kewsuwan P. et al., Carbohydr. Polym., 2017, 157, 603.https://doi.org/10.1016/j.carbpol.2016.10.029 [50] Nguyen H., Morgan D., ForwoodM., Cell Tissue Bank, 2007, 8,81. https://doi.org/10.1007/s10561-006-9019-7 [51] Zulli G., Lopes P., VelascoM. et al., Radiat. Phys. Chem., 2010,79, 286. https://doi.org/10.1016/j.radphyschem.2009.08.025 [52] IlčinM., Holá O., Bakajová B., Kučerík J., J. Radioanal. Nucl. Chem., 2010, 283, 9. https://doi.org/10.1007/s10967-009-0321-2 [53] Pokorný D., ŠloufM., Fulín P., Acta Chir. Orthop. Traumatol. Cech., 2012, 79, 213. [54] Zheng J., Clogston J., Patri A. et al., J. Nanomedicine Nanotechnol., 2011, 5, 001. https://doi.org/10.4172/2157-7439.S5-001 [55] Farmacopeia Brasileira. Agência Nacional de Vigilância Sanitária. Anvisa 2010. [56] Lambert B.,Mendelson T., CravenM., AAPS Pharm. Sci. Tech.,2011, 12, 1116. https://doi.org/10.1208/s12249-011-9644-8 [57] SilindirM., Ozer Y., PDA J. Pharm. Sci. Technol., 2012, 66,184. https://doi.org/10.5731/pdajpst.2012.00774 [58] Kokai L., Ghaznavi A., Marra K., Biomaterials, 2010, 31, 2313.https://doi.org/10.1016/j.biomaterials.2009.11.075 [59] LiechtyW., Kryscio D., Slaughter B., Peppas N., Annu. Rev. Chem. Biomol. Eng., 2010, 1, 149. https://doi.org/10.1146/annurevchembioeng-073009-100847 [60] Sun Q., Silva E.,Wang A. et al., Pharm. Res., 2010, 27, 264.https://doi.org/10.1007/s11095-009-0014-0 [61] Kumari A., Yadav SK., Yadav SC., Colloid. Surf. B, 2010, 75, 1.https://doi.org/10.1016/j.colsurfb.2009.09.001 [62] Lee S., Hughes P., Ross A., RobinsonM., Pharm. Res., 2010, 27,2043. https://doi.org/10.1007/s11095-010-0159-x [63] Lyons J., Blackie P., Higginbotham C., Int. J. Pharm., 2008, 351,201. https://doi.org/10.1016/j.ijpharm.2007.09.041 [64] Uddin A., Bejugam N., Gayakwad S. et al., J. Drug Target.,2009, 17, 553. https://doi.org/10.1080/10611860903067301 [65] Yoo D., Lee J-H., Shin T-H., Cheon J.:Acc. Chem. Res., 2011,44, 863. https://doi.org/10.1021/ar200085c [66] Behrens S.:Nanoscale, 2011, 3, 877.https://doi.org/10.1039/P.0NR00634C [67] Veiseh O., Gunn J., ZhangM., Adv. Drug Deliv. Rev., 2010, 62,284. https://doi.org/10.1016/j.addr.2009.11.002 [68] DohertyC., Buso D., Hill A. et al.:Acc. Chem. Res., 2014, 47,396. https://doi.org/10.1021/ar400130a [69] Severino P., de Oliveira G., Ferraz H. et al., J. Pharm. Anal.,2012, 2, 188. https://doi.org/10.1016/j.jpha.2012.02.005 [70] Pastor M., Esquisabel A., Talavera A. et al., Int. J. Pharm., 2013,448, 247. https://doi.org/10.1016/j.ijpharm.2013.02.057 [71] Cosco D., Failla P., Costa N. et al., Carbohydr. Polym., 2016,152, 583. https://doi.org/10.1016/j.carbpol.2016.06.039 [72] Dreve S., Kacso I., Popa A. et al., J. Mol. Struct., 2011, 997, 78.https://doi.org/10.1016/j.molstruc.2011.05.001 [73] Kazazi-Hyseni F., Zandstra J., Popa E. et al., Int. J. Pharm., 2015,482, 99. https://doi.org/10.1016/j.ijpharm.2014.12.014 [74] Rogobete A., DragomirescuM., Bedreag O. et al., Trends Anaesth. Crit. Care., 2016, 9, 27.https://doi.org/10.1016/j.tacc.2016.06.004 [75] Ting C-Y., Fan C-H., Liu H-L. et al: Biomaterials, 2012, 33, 704.https://doi.org/10.1016/j.biomaterials.2011.09.096 [76] Gref R., Domb A., Quellec P. et al., Adv. Drug Deliv. Rev.,1995, 16, 215. https://doi.org/10.1016/0169-409X(95)00026-4 [77] ElsabahyM., Wooley K., Chem. Soc. Rev., 2012, 41, 2545.https://doi.org/10.1039/P.2cs15327k [78]Mohanraj K., Sethuraman S., Krishnan U., J. Biomed. Mater. Res. B, 2013, 101B, 840. https://doi.org/10.1002/jbm.b.32888 [79]Wang Q-S., Wang G-F., Zhou J. et al., Int. J. Pharm., 2016, 515,176. https://doi.org/10.1016/j.ijpharm.2016.10.002 [80] JanssenM., Timur U., Woike N. et al., J. Control. Release, 2016,244A, 30. https://doi.org/10.1016/j.jconrel.2016.11.003 [81]Makadia H., Siegel S., Polymers, 2011, 3, 1377.https://doi.org/10.3390/polym3031377 [82]Miyata K., Christie R., Kataoka K., React. Funct. Polym., 2011,71, 227. https://doi.org/10.1016/j.reactfunctpolym.2010.10.009 [83] Deng C., Jiang Y., Cheng R. et al.:Nano Today, 2012, 7, 467.https://doi.org/10.1016/j.nantod.2012.08.005 [84] Herrero-Vanrell R., Bravo-Osuna I., Andrés-Guerrero V. et al., Prog. Retin. Eye Res., 2014, 42, 27.https://doi.org/10.1016/j.preteyeres.2014.04.002 [85] Sharma P., Garg S., Adv. Drug Deliv. Rev., 2010, 62, 491.https://doi.org/10.1016/j.addr.2009.11.019 [86] Cheng R., Meng F., Deng C. et al., Biomaterials, 2013, 34, 3647.https://doi.org/10.1016/j.biomaterials.2013.01.084 [87] XuW., Ling P., Zhang T., J. Drug Deliv., 2013, 2013, 340315.https://doi.org/10.1155/2013/340315. [88] Seyednejad H., Ghassemi A., van Nostrum C. et al., J. Control. Release, 2011, 152, 68. https://doi.org/10.1016/j.jconrel.2010.12.016 [89] Cameron D., Shaver M., Chem. Soc. Rev., 2011, 40, 1761.https://doi.org/10.1039/P.0CS00091D [90] Aliabadi H., LandryB., Mahdipoor P. et al., Eur. J. Pharm. Biopharm., 2012, 81, 33. https://doi.org/10.1016/j.ejpb.2012.01.011 [91] Shen J., Choi S., QuW. et al., J. Control. Release, 2015, 218, 2.https://doi.org/10.1016/j.jconrel.2015.09.051 [92] Grumezescu V., Socol G., Grumezescu A. et al., Appl. Surf. Sci.,2014, 302, 262. https://doi.org/10.1016/j.apsusc.2013.09.081 [93] Jain A., Kunduru K., Basu A. et al., Adv. Drug Deliv. Rev.,2016, 107, 213. https://doi.org/10.1016/j.addr.2016.07.002 [94] Park J-H., Han C-M., Lee E-J., KimH-W.:Mater. Lett., 2016,181, 92. https://doi.org/10.1016/j.matlet.2016.06.020 [95] Pereira E., Cerruti R., Fernandes E. et al., PolÃ-Meros., 2016, 26,137. https://doi.org/10.1590/0104-1428.2323 [96] Blumenthal P.,Manickam S., Espadas C., Rajadas J., 69th American Society for ReproductiveMedicine (ASRM) Annual Meeting, USA, Boston, Oct. 12-17, 2013, 316. [97] Park K., 30th Anniv. Spec. Issue, 2014, 190, 3.https://doi.org/10.1016/j.jconrel.2014.03.054 [98] Gigli M., FabbriM., Lotti N. et al., Eur. Polym. J., 2016, 75, 431.https://doi.org/10.1016/j.eurpolymj.2016.01.016 [99] Cho H., Lai T., Kwon G., J. Control. Release, 2013, 166, 1.https://doi.org/10.1016/j.jconrel.2012.12.005 [100] Zhu Z., Xie C., Liu Q. et al., Biomaterials, 2011, 32, 9525.https://doi.org/10.1016/j.biomaterials.2011.08.072 [101] Dash T., Konkimalla V., J. Control. Release, 2012, 158, 15.https://doi.org/10.1016/j.jconrel.2011.09.064 [102] Grage K., Jahns A., Parlane N. et al., Biomacromolecules, 2009,10, 660. https://doi.org/10.1021/bm801394s [103] ShahM., NaseerM., ChoiM. et al., Int. J. Pharm., 2010, 400,165. https://doi.org/10.1016/j.ijpharm.2010.08.008 [104] Xiong Y-C., Yao Y-C., Zhan X-Y., Chen G-Q., J. Biomater. Sci. Polym. Edn., 2010, 21, 127.https://doi.org/10.1163/156856209X410283 [105] Shrivastav A., Kim H-Y., Kim Y-R., BioMed Res. Int., 2013,2013, 581684. https://doi.org/10.1155/2013/581684. [106] Akaraonye E., Keshavarz T., Roy I., J. Chem. Technol. Biotechnol., 2010, 85, 732. https://doi.org/10.1002/jctb.2392 [107] Chanprateep S., J. Biosci. Bioeng., 2010, 110, 621.https://doi.org/10.1016/j.jbiosc.2010.07.014 [108]Murase S., Aymat M., Calvet A. et. al., Eur. Polym. J., 2015,71, 196. https://doi.org/10.1016/j.eurpolymj.2015.07.047 [109] Nugroho P., Mitomo H., Yoshii F. et. al.:Macromol. Mater. Eng., 2001, 286, 316. https://doi.org/10.1002/1439-2054(20010501)286:5<316::AID-MAME316>3.0.CO;2-N [110] Hwang S., Yoo E., Im S., Polym. J., 2012, 44, 1179.https://doi.org/10.1038/pj.2012.157 [111] Zhou X-M.:Mater. Sci. Eng. C, 2012, 32, 2459.https://doi.org/10.1016/j.msec.2012.07.025 [112] Llorens E., Ibañez H., del Valle L., Puiggalí J.:Mater. Sci. Eng. C, 2015, 49, 472. https://doi.org/10.1016/j.msec.2015.01.039 [113] Zhao J., Wang X., Zeng J. et al., J. Appl. Polym. Sci., 2005, 97,2273. https://doi.org/10.1002/app.22009 [114] Xu J., Guo B., Biotechnol. J., 2010, 5, 1149.https://doi.org/10.1002/biot.201000136 [115] Ferreira L.,Moreira A., Pinto J., de Souza F., Polym. Eng. Sci.,2015, 55, 1889. https://doi.org/10.1002/pen.24029 [116] Cho K., Lee J., Kwon K., J. Appl. Polym. Sci., 2001, 79, 1025.https://doi.org/10.1002/1097-4628(20010207)79:6<1025::AIDAPP50>3.0.CO;2-7 [117] Gualandi C., SoccioM., Saino E. et al., Soft Matter., 2012, 8,5466. https://doi.org/10.1039/P.2sm25308a [118]Wang J., Ng C.,Win K. et al., J. Microencapsul., 2003, 20, 317.https://doi.org/10.3109/02652040309178072 [119] Bahari K.,Mitomo H., Enjoji T. et al., Polym. Degrad. Stab.,1998, 62, 551. https://doi.org/10.1016/S0141-3910(98)00041-X [120]Wu S., Zheng L., Li C. et al., Polym. Chem., 2015, 6, 1495.https://doi.org/10.1039/P.4PY01305K [121] Deepthi S., Viha C., Thitirat C. et al., Polymers, 2014, 6, 2974.https://doi.org/10.3390/polym6122974 [122] Costa-Pinto A., Correlo V., Sol P. et al., J. Tissue Eng. Regen. Med., 2012, 6, 21. https://doi.org/10.1002/term.391 [123] Niu Y., Cao L., Wei J. et al., J. Mater. Chem. B, 2014, 2, 1174.https://doi.org/10.1039/P.3tb21371d [124] Sutthiphong S., Pavasant P., Supaphol P., Polymer, 2009, 50,1548. https://doi.org/10.1016/j.polymer.2009.01.042 [125]Wang H., Ji J., ZhangW. et al., Acta Biomater., 2010, 6, 154.https://doi.org/10.1016/j.actbio.2009.07.026 [126]Wang H., Wang S., Liao Z. et al., Int. J. Pharm., 2012, 430, 342.https://doi.org/10.1016/j.ijpharm.2012.04.009 [127]Wang H., Chang X., Qiu G. et al., Int. J. Polym. Sci., 2014,2014, 153453. https://doi.org/10.1155/2014/153453 [128] Shishatskaya E., Goreva A., Kalacheva G., Volova T., J. Biomater. Sci. Polym. Edn., 2011, 22, 2185.https://doi.org/10.1163/092050610X537138 [129]Mitra A., Wu Y., Recent Pat. Drug Deliv. Formul., 2010, 4, 94.https://doi.org/10.2174/187221110791185024 [130] Kim S., Lim C-K., Na J. et al., Chem. Commun., 2010, 46,1617. https://doi.org/10.1039/b923309a [131] deYoungM.,MacConell L., Sarin V. et al.:Diabetes Technol. Ther., 2011, 13, 1145. https://doi.org/10.1089/dia.2011.0050 [132] NguyenM., Lee D.:Macromol. Biosci., 2010, 10, 563.https://doi.org/10.1002/mabi.200900402 [133]Markovsky E., Baabur-Cohen H., Eldar-Boock A. et al., J. Control. Release, 2012, 161, 446.https://doi.org/10.1016/j.jconrel.2011.12.021 [134] Sakata N., Aoki T., Yoshimatsu G. et al.:DiabetesMetab. Res. Rev., 2014, 30, 1. https://doi.org/10.1002/dmrr.2463 [135] Tian X.,Wei F., Wang T. et al.:Mater. Lett., 2012, 68, 94.https://doi.org/10.1016/j.matlet.2011.10.042 [136] Zhao X., Yao Y., Tian K. et al., Eur. J. Pharm. Biopharm.,2016, 108, 91. https://doi.org/10.1016/j.ejpb.2016.08.018 [137] Jevševar S., KunsteljM., Porekar V., Biotechnol. J., 2010, 5,113. https://doi.org/10.1002/biot.200900218 [138] Gautier J.,Munnier E., Paillard A. et al., Int. J. Pharm., 2012,423, 16. https://doi.org/10.1016/j.ijpharm.2011.06.010 [139] Pasut G., Veronese F., J. Control. Release, 2012, 161, 461.https://doi.org/10.1016/j.jconrel.2011.10.037 [140]Milla P., Dosio F., Cattel L., Curr. DrugMetab., 2012, 13, 105.https://doi.org/10.2174/138920012798356934 [141] Valente I., Celasco E., Marchisio D., Barresi A., Chem. Eng. Sci., 2012, 77, 217. https://doi.org/10.1016/j.ces.2012.02.050 [142] Zhao P., Wang H., YuM. et al., Eur. J. Pharm. Biopharm.,2012, 81, 248. https://doi.org/10.1016/j.ejpb.2012.03.004 [143] Ogawara K., Furumoto K., Nagayama S. et al., J. Control. Release, 2004, 100, 451. https://doi.org/10.1016/j.jconrel.2004.07.028 [144] Lu Y., Low P., Adv. Drug Deliv. Rev., 2002, 54, 675.. [145] Kost J., Langer R., Adv. Drug Deliv. Rev., 2012, 64, 327. [146] Elzoghby A., SamyW., ElgindyN., J. Control. Release, 2012,157, 168. https://doi.org/10.1016/j.jconrel.2011.07.031 [147] Gormley A., Larson N., Sadekar S. et al.:Nano Today, 2012, 7,158. https://doi.org/10.1016/j.nantod.2012.04.002 [148] Liu Y., Li K., Pan J. et al., Biomaterials, 2010, 31, 330.https://doi.org/10.1016/j.biomaterials.2009.09.036 [149] Fredholm B., Exp. Cell Res., 2010, 316, 1284.https://doi.org/10.1016/j.yexcr.2010.02.004 [150] Kataoka K., Harada A., Nagasaki Y.:Nanopart. Syst. Improv. Drug Deliv., 2001, 47, 113. https://doi.org/10.1016/S0169-409X(00)00124-1 [151] Nishiyama N., Cabral H., Kataoka K.:Micellar Structures as Drug Delivery Systems. [in:] Kratz F., Senter P., Steinhagen H. (Eds.) Drug Delivery in Oncology: From Basic Research to Cancer Therapy. Wiley-VCH Verlag GmbH & Co. KgaA, Weinheim 2011, 1051–69.https://doi.org/10.1002/9783527634057.ch32 [152] Na X-M., Gao F., Zhang L-Y. et al., ACSMacro Lett., 2012, 1,697. https://doi.org/10.1021/mz200222d [153] SinghM., Hemant K., Ram M., Shivakumar H., Res. Pharm. Sci., 2011, 5, 65. [154] Szabó T., Molnár-Nagy L., Bognár J. et al., Prog. Org. Coat.,2011, 72, 52. https://doi.org/10.1016/j.porgcoat.2011.03.014 [155] Nordstierna L., Abdalla A., NordinM., NydénM., Prog. Org. Coat., 2010, 69, 49. https://doi.org/10.1016/j.porgcoat.2010.05.003 [156] Torchilin V., J. Control. Release, 2001, 73, 137.https://doi.org/10.1016/S0168-3659(01)00299-1 [157] Zhang Y., Wei W., Lv P. et al., Eur. J. Pharm. Biopharm., 2011,77, 11. https://doi.org/10.1016/j.ejpb.2010.09.016 [158] Jyothi N., Prasanna P., Sakarkar S. et al., J.Microencapsul.,2010, 27, 187. https://doi.org/10.3109/02652040903131301 [159] ChangM-W., Stride E., Edirisinghe M., Langmuir, 2010, 26,5115. https://doi.org/10.1021/la903592s [160]Ma Y., Zhang Y., ZhaoM. et al., Chem. Commun., 2012, 48,6217. https://doi.org/10.1039/P.2cc31932b [161]Mitragotri S., Burke P., Langer R.:Nat. Rev. Drug Discov.,2014, 13, 655. https://doi.org/10.1038/nrd4363 [162] Patel B., Gupta V., Ahsan F., J. Control. Release, 2012, 162,310. https://doi.org/10.1016/j.jconrel.2012.07.003 [163] NatuM., de Sousa H., GilM., Int. J. Pharm., 2010, 397, 50.https://doi.org/10.1016/j.ijpharm.2010.06.045 [164] Nguyen T., Ghosh C., Hwang S-G. et al., Int. J. Pharm., 2012,439, 296. https://doi.org/10.1016/j.ijpharm.2012.09.019 [165] Kang X., Cheng Z., Yang D. et al., Adv. Funct. Mater., 2012,22, 1470. https://doi.org/10.1002/adfm.201102746 [166] Berchane N., Carson K., Rice-Ficht A., AndrewsM., Int. J. Pharm., 2007, 337, 118. https://doi.org/10.1016/j.ijpharm.2006.12.037 [167] KobiasiM., Chua B., Tonkin D. et al., J. Biomed. Mater. Res.A, 2012, 100A, 1859. https://doi.org/10.1002/jbm.a.34153 [168] Arnida, Janát-AmsburyM., RayA. et al., Eur. J. Pharm. Biopharm., 2011, 77, 417. https://doi.org/10.1016/j.ejpb.2010.11.010 [169] SilvaM.,Winkler Hechenleitner A., de Oliveira D. et al., Eur. J. Pharm. Sci., 2013, 49, 343. https://doi.org/10.1016/j.ejps.2013.04.006 [170]Mout R.,Moyano D., Rana S., Rotello V., Chem. Soc. Rev.2012, 41, 2539. https://doi.org/10.1039/P.2cs15294k [171] Du J-Z., Du X-J.,Mao C-Q., Wang J., J. Am. Chem. Soc.,2011, 133, 17560. https://doi.org/10.1021/ja207150n [172] Tabatabaei Rezaei S., NabidM., Niknejad H., Entezami A., Polymer, 2012, 53, 3485.https://doi.org/10.1016/j.polymer.2012.05.056 [173] Choi K., Chung H.,Min K. et al., Biomaterials, 2010, 31, 106.https://doi.org/10.1016/j.biomaterials.2009.09.030 [174] Yoo J-W., Doshi N.,Mitragotri S., Adv. Drug Deliv. Rev.,2011, 63, 1247. https://doi.org/10.1016/j.addr.2011.05.004 [175] Sharma G., Valenta D., Altman Y. et al., J. Control. Release,2010, 147, 408. https://doi.org/10.1016/j.jconrel.2010.07.116 [176] Venkataraman S., Hedrick J., Ong Z. et al., Adv. Drug Deliv. Rev., 2011, 63, 1228. https://doi.org/10.1016/j.addr.2011.06.016 [177] Champion J., Katare Y.,Mitragotri S., J. Control. Release,2007, 121, 3. https://doi.org/10.1016/j.jconrel.2007.03.022 [178] Tomic I., Vidis-Millward A., Mueller-ZsigmondyM., Cardot JM., Int. J. Pharm., 2016, 505, 42.https://doi.org/10.1016/j.ijpharm.2016.03.048 [179] Brunner C., Baran E., Pinho E. et al., Colloids Surf. B, 2011, 84,498. https://doi.org/10.1016/j.colsurfb.2011.02.005 [180] Dalmoro A., Lamberti G., Titomanlio G. et al., AAPS Pharm. Sci.Tech., 2010, 11, 1500. https://doi.org/10.1208/s12249-010-9528-3 [181]Ma G., J. Control. Release, 2014, 193, 324.https://doi.org/10.1016/j.jconrel.2014.09.003 [182] Tonon R., Grosso C., HubingerM., Food Res. Int., 2011, 44,282. https://doi.org/10.1016/j.foodres.2010.10.018 [183] Rokka S., Rantamäki P., Eur. Food Res. Technol., 2010, 231, 1.https://doi.org/10.1007/s00217-010-1246-2 [184] Bosnea L., Moschakis T., Biliaderis C., Food Bioprocess. Technol., 2014, 7, 2767. https://doi.org/10.1007/s11947-014-1317-7 [185] Li M., Rouaud O., Poncelet D., Int. J. Pharm., 2008, 363, 26.https://doi.org/10.1016/j.ijpharm.2008.07.018 [186] DelgadoM., Lázaro A., Mazo J., Zalba B., Renew Sustain EnergyRev., 2012, 16, 253. https://doi.org/10.1016/j.rser.2011.07.152 [187] ZhuM., Shi J., He Q. et al., J. Mater. Sci., 2012, 47, 2256.https://doi.org/10.1007/s10853-011-6037-z [188] Lee S.,McClements D., Food Hydrocoll., 2010, 24, 560.https://doi.org/10.1016/j.foodhyd.2010.02.002 [189] Hung L-H., Teh S-Y., Jester J., Lee A., Lab. Chip., 2010, 10,1820. https://doi.org/10.1039/P.002866e [190] Staff R., Schaeffel D., Turshatov A. et al., Small, 2013, 9, 3514.https://doi.org/10.1002/smll.201300372 [191]Webster D., Sundaram P., ByrneM., Eur. J. Pharm. Biopharm.,2013, 84, 1. https://doi.org/10.1016/j.ejpb.2012.12.009 [192] Nath S., Son S., Sadiasa A. et al., Int. J. Pharm., 2013, 443, 87.https://doi.org/10.1016/j.ijpharm.2012.12.037 [193] Hao S., Wang Y.,Wang B. et al.:Mater. Sci. Eng. C, 2013, 33,4562. https://doi.org/10.1016/j.msec.2013.07.009 [194] Lee Y-H., Mei F., BaiM-Y. et al., J. Control. Release, 2010,145, 58. https://doi.org/10.1016/j.jconrel.2010.03.014 [195] Patil Y., Swaminathan S., Sadhukha T. et al., Biomaterials,2010, 31, 358. https://doi.org/10.1016/j.biomaterials.2009.09.048 [196] Sridhar R., Ramakrishna S., Biomatter., 2013, 3, e24281.https://doi.org/10.4161/biom.24281. [197] Almería B., Fahmy T., Gomez A., J. Control. Release, 2011,154, 203. https://doi.org/10.1016/j.jconrel.2011.05.018 [198] Almería B., DengW., Fahmy T., Gomez A., J. Colloid Interf. Sci., 2010, 343, 125. https://doi.org/10.1016/j.jcis.2009.10.002 [199] Almería B., Gomez A., J. Colloid Interf. Sci., 2014, 417, 121.https://doi.org/10.1016/j.jcis.2013.11.037 [200] Bock N., WoodruffM., Hutmacher D., Dargaville T., Polymers,2011, 3, 131. https://doi.org/10.3390/polym3010131 [201]Malik S., NgW., Bowen J. et al., J. Colloid Interf. Sci., 2016,467, 220. https://doi.org/10.1016/j.jcis.2016.01.021 [202] Gert N., Fabian S., Twan K. ET AL., Int. J. Pharm., 2016, 499,358. https://doi.org/10.1016/j.ijpharm.2016.01.020 [203] Zhang K., WuW., Guo K. et al., Colloid. Surface Physicochem. Eng. Asp., 2009 349, 110.https://doi.org/10.1016/j.colsurfa.2009.08.005 [204] Javadzadeh Y., Ahadi F., Davaran S. et al., Colloid. Surface B,2010, 81, 498. https://doi.org/10.1016/j.colsurfb.2010.07.047 [205] Paillard-Giteau A., Tran V., Thomas O. et al., Eur. J. Pharm. Biopharm., 2010, 75, 128. https://doi.org/10.1016/j.ejpb.2010.03.005 [206] Luciani A., Coccoli V., Orsi S. et al., Biomaterials, 2008, 29,4800. https://doi.org/10.1016/j.biomaterials.2008.09.007 [207] Liu X., KaminskiM., Riffle J. et al., J. Magn. Magn.Mater.,2007, 311, 84. https://doi.org/10.1016/j.jmmm.2006.10.1170 [208] Rosca I., Watari F., UoM., J. Control. Release, 2004, 99, 271.https://doi.org/10.1016/j.jconrel.2004.07.007 [209] Barichello J.,MorishitaM., Takayama K., Nagai T.:Drug Dev. Ind. Pharm., 1999, 25, 471. https://doi.org/10.1081/DDC-100102197 [210] Giunchedi P., Conte U., Alpar H., J.Microencapsul., 1998, 15,185. https://doi.org/10.3109/02652049809006848 [211] Kim C., Ghosh P., Pagliuca C. et al., J. Am. Chem. Soc., 2009,131, 1360. https://doi.org/10.1021/ja808137c [212]Wischke C., Schwendeman S., Int. J. Pharm., 2008, 364, 298.https://doi.org/10.1016/j.ijpharm.2008.04.042 [213] Lee T., Wang J., Wang C., J. Control. Release, 2002, 83, 437.https://doi.org/10.1016/S0168-3659(02)00235-3 [214] Pinon-Segundo E., Nava-ArzaluzM., Lechuga-Ballesteros D., Recent Pat. Drug Deliv. Formul., 2012 6, 224.https://doi.org/10.2174/187221112802652606 [215] Lee S.,McClements D., Food Hydrocoll., 2010, 24, 560. https://doi.org/10.1016/j.foodhyd.2010.02.002 [216] AyoubM., Ahmed N., Kalaji N. et al., J. Biomed. Nanotechnol., 2011, 7, 255. https://doi.org/10.1166/jbn.2011.1279 [217]Medeiros A.,Machado F., Rubim J.,McKenna T., J. Polym. Sci. A, 2017, 55, 1422. https://doi.org/10.1002/pola.28511 [218]Machado F., Lima E., Pinto J., Polym. Eng. Sci., 2010, 50, 697.https://doi.org/10.1002/pen.21572 [219] Araujo R., Ferreira G., Segura T. et al., Eur. Polym. J., 2015, 68,441. https://doi.org/10.1016/j.eurpolymj.2015.05.015 [220] Jensen A., Sayer C., Araújo P.,Machado F., Eur. J. Lipid Sci. Technol., 2014, 116, 37. https://doi.org/10.1002/ejlt.201300212 [221] Jensen A., de Oliveira A., Gonçalves S. et al., J Appl Polym Sci.2016, 133. https://doi.org/10.1002/app.44129 [222] Neves J., Valadares L.,Machado F., Curr. Appl. Polym. Sci.,2017, 1, 79. https://doi.org/10.2174/2452271601666170221124329 [223] Soares M.,Machado F., Guimarães A. et al., Polym. Eng. Sci.,2011, 51, 1919. https://doi.org/10.1002/pen.22002 [224] Freitas S.,Merkle H., Gander B., J. Control. Release, 2005, 102,313. https://doi.org/10.1016/j.jconrel.2004.10.015 [225]Machado F., Lima E., Pinto J., Polímeros, 2007, 17, 166.https://doi.org/10.1590/S0104-14282007000200016 [226] Peng Z., Li S., Han X. et al., Anal. Chim. Acta, 2016, 937, 113.https://doi.org/10.1016/j.aca.2016.08.014 [227] Ramazani F., ChenW., van Nostrum C. et al., Int. J. Pharm.,2016, 499, 358. https://doi.org/10.1016/j.ijpharm.2016.01.020 [228] Katou H., Wandrey A., Gander B., Int. J. Pharm., 2008, 364, 45.https://doi.org/10.1016/j.ijpharm.2008.08.015 [229] Qi F., Wu J., Fan Q. et al., Colloid. Surface B, 2013, 112, 492.https://doi.org/10.1016/j.colsurfb.2013.08.048 [230] Yunoki A., Tsuchiya E., Fukui Y. et al., ACS Appl. Mater. Interfaces, 2014, 6, 11973. https://doi.org/10.1021/am503030c [231] Park S., Lee Y., Hong S., Colloid. Surface B, 2006, 47, 211.https://doi.org/10.1016/j.colsurfb.2005.12.001 [232] Crucho C., BarrosM., Polymer, 2015, 68, 41.https://doi.org/10.1016/j.polymer.2015.04.083 [233] Ruger M., Hohmann S., SommerfeldM., Kohnen G., At. Sprays, 2000, 10, 30. https://doi.org/10.1615/AtomizSpr.v10.i1.30 [234] Faure A., York P., Rowe R., Eur. J. Pharm. Biopharm., 2001,52, 269. https://doi.org/10.1016/S0939-6411(01)00184-9 [235] Zastre J., Jackson J., Burt H., Pharm. Res., 2004, 21, 1489.https://doi.org/10.1023/B:PHAM.0000036925.45002.a2 [236] Huang P., Wang D., Su Y. et al., J. Am. Chem. Soc., 2014, 136,11748. https://doi.org/10.1021/ja505212y [237] Djordjevic L., PrimoracM., StuparM., Krajisnik D., Int. J. Pharm., 2004, 271, 11. https://doi.org/10.1016/j.ijpharm.2003.10.037 [238]Mayya K., Bhattacharyya A., Argillier J-F., Polym. Int., 2003,52, 644. https://doi.org/10.1002/pi.1125 [239]Wang X., Danoff E., Sinkov N. et al., Langmuir, 2006, 22,6461. https://doi.org/10.1021/la0605135 [240] Uchegbu I., Vyas S., Int. J. Pharm., 1998, 172, 33.https://doi.org/10.1016/S0378-5173(98)00169-0 [241] Rosa G., Iommelli R., La RotondaM. et al., J. Control. Release,2000, 69, 283. https://doi.org/10.1016/S0168-3659(00)00315-1 [242] Yeo Y., Park K., Arch. Pharm. Res., 2004, 27, 1.https://doi.org/10.1007/BF02980037 [243] Zhang Y., Wischke C.,Mittal S. et al.:Mol. Pharm., 2016, 13,2622. https://doi.org/10.1021/acs.molpharmaceut.5b00961 [244] Jagdale S., Pawar S., Adv. Pharm. Bull., 2017, 7, 229.https://doi.org/10.15171/apb.2017.028 [245] Haider M., Ranjha N., BakhtM. et al., Lat. Am. J. Pharm.,2017, 36, 281. [246] Calderó G.,Montes R., LlinàsM. et al., Colloid. Surface B,2016, 145, 922. https://doi.org/10.1016/j.colsurfb.2016.06.013 [247]Marto J., Gouveia L., Jorge I. et al., Colloid Surface B, 2015,135, 183. https://doi.org/10.1016/j.colsurfb.2015.07.024 [248] Bulut E., Artif. Cells Nanomed. Biotechnol., 2016, 44, 1482. https://doi.org/10.3109/21691401.2015.1042109 [249] Yi T., Liu C., Zhang J. et al., Eur. J. Pharm. Sci., 2017, 96, 420. https://doi.org/10.1016/j.ejps.2016.08.047 [250]Monaco G., Cholas R., Salvatore L. et al.:Mater. Sci. Eng. C.,2017, 71, 335. https://doi.org/10.1016/j.msec.2016.10.030 [251] Lyons D., Mendenhall S., NeumeisterM. et al., Plast. Reconstr. Surg. Glob. Open, 2016, 4, e823.https://doi.org/10.1097/GOX.0000000000000819 [252] Sakar F., Özer A., Erdogan S. et al., Pharm. Dev. Technol.,2017, 22, 775. https://doi.org/10.3109/10837450.2016.1163393 [253] Yaman A., Curr. Opin. Drug Discov. Devel., 2001, 4, 760. [254] Sommerfeld P., Schroeder U., Sabel B., Int. J. Pharm., 1998,164, 113. https://doi.org/10.1016/S0378-5173(97)00394-3 [255] Kroeze R., HelderM., RoosW. et al.:Acta Biomater., 2010, 6,2060. https://doi.org/10.1016/j.actbio.2009.11.022 [256]Mendes G., Brandão T., Silva C., Am. J. Infect. Control., 2007,35, 574. https://doi.org/10.1016/j.ajic.2006.10.014 [257] Zajko Š., Klimant I., Sensor. Actuat. B-Chem., 2013, 177, 86.https://doi.org/10.1016/j.snb.2012.10.040 [258] SavarisM., Carvalho G., Falavigna A. et al.:Mater. Res., 2016,19, 807. https://doi.org/10.1590/1980-5373-MR-2015-0200 [259]Wilson A., Nayak S., Anesth. Intense. Care Medicine, 2016, 17,475. http://dx.doi.org/10.1016/j.mpaic.2016.07.002 [260] Rediguieri C., Sassonia R., Dua K. et al., Eur. Polym. J., 2016,82, 181. https://doi.org/10.1016/j.eurpolymj.2016.07.016 [261] Uguz I., GanjiM., Hama A. et al., Adv. Healthc. Mater., 2016,5, 3094. https://doi.org/10.1002/adhm.201600870 [262] Yilmaz B., L’Homme-Langlois E., Beck F.M,McGlumphy E., J. Prosthet. Dent., 2016, 115, 718.https://doi.org/10.1016/j.prosdent.2015.11.001 [263] RogersW., Steam and DryHeat Sterilization of Biomaterials and Medical Devices. [in:] Lerouge S., Simmons A. (Eds.), Sterilisation of Biomaterials andMedical Devices. Woodhead Publishing, Cambridge 2012, 20-55. [264] RogersW., Sterilisation Techniques for Polymers. [in:] Lerouge S., Simmons A. (Eds.), Sterilisation of Biomaterials andMedical Devices. Woodhead Publishing, Cambridge 2012, 151-211. [265] Sandle T., Sterility, Sterilisation and SterilityAssurance for Pharmaceuticals. Woodhead Publishing, Cambridge 2013, ch. 7, 93-99. [266] Bilensoy E., Hincal A., Cyclodextrin-Based Nanomaterials in Pharmaceutical Field. [in:] Gad S. (Ed.), Pharmaceutical Sciences Encyclopedia. JohnWiley& Sons Inc., Hoboken 2010, 1-23.https://doi.org/10.1002/9780470571224.pse370 [267] Kotha S., Ramakrishnaiah R., Devang Divakar D. et al. J. Investig. Clin. Dent., 2016. https://doi.oeg/10.1111/jicd.12244. [268] Godefroid S., Vyver A., Stoffelen P., Vanderborght T., Plant Biosystems, 2017, 151, 1054. https://doi.org/10.1080/11263504.2016.1231140 [269] Sandle T., Sterility, Sterilisation and SterilityAssurance for Pharmaceuticals. Woodhead Publishing, Cambridge 2013, ch.10, 143-55. [270] Konan Y., GurnyR., Allémann E., Int. J. Pharm., 2002, 233,239. https://doi.org/10.1016/S0378-5173(01)00944-9 [271] Li L., Mak K., Shi J. et al.:Microelectron. Eng., 2013, 111, 310.https://doi.org/10.1016/j.mee.2013.02.021 [272] Dobrovolskaia M.,McNeil S. (Eds.):Handbook of Immunological Properties of Engineered NanomaterialsWorld Scientific Publishing Co, New Jersey 2016. [273] Rai R., TallawiM., Roether J. et al.:Mater. Lett., 2013, 105, 32.https://doi.org/10.1016/j.matlet.2013.04.024 [274] Dearth C., Keane T., Carruthers C. et al., Acta Biomater., 2016,33, 78. https://doi.org/10.1016/j.actbio.2016.01.038 [275] Fan X., Sokorai K., Weidauer A. et al., Radiat. Phys. Chem.,2017, 130, 306. https://doi.org/10.1016/j.radphyschem.2016.09.015 [276] Mrázová H., Koller J., Kubišová K. et al., Cell Tissue Bank.,2016, 17, 255. https://doi.org/10.1007/s10561-015-9536-3 [277] Bhatnagar D., Dube K., Damodaran V. et al.:Macromol. Mater. Eng., 2016, 301, 1211. https://doi.org/10.1002/mame.201600133 [278] Sefat F.,McKean R., Deshpande P. et al., Procedia Eng., 2013,59, 101. https://doi.org/10.1016/j.proeng.2013.05.099 [279]Wang J., Chu L., Radiat. Phys. Chem., 2016, 125, 56.https://doi.org/10.1016/j.radphyschem.2016.03.012 [280] Zembouai I., Kaci M., Bruzaud S. et al., Polym. Degrad. Stab.,2016, 132, 117.https://doi.org/10.1016/j.polymdegradstab.2016.03.019 [281] SuhartiniM.,Mitomo H., Nagasawa N. et al., J. Appl. Polym. Sci., 2003, 88, 2238. https://doi.org/10.1002/app.11944 [282] Croonenborghs B., SmithM., Strain P., Radiat. Phys. Chem.,2007, 76, 1676. https://doi.org/10.1016/j.radphyschem.2007.01.014 [283]Memisoglu-Bilensoy E., Hincal A., Int. J. Pharm., 2006, 311,203. https://doi.org/10.1016/j.ijpharm.2005.12.013 [284] Valente T., Silva D., Gomes P. et al., ACS Appl. Mater. Interfaces, 2016, 8, 3241. https://doi.org/10.1021/acsami.5b10869 [285] Chmielewski A., Haji-SaeidM., Ahmed S.:Nucl. Instrum. Meth B, 2005, 236, 44. https://doi.org/10.1016/j.nimb.2005.03.247 [286] Ražem D., Katušin-Ražem B., Radiat. Phys. Chem., 2008, 77,288. https://doi.org/10.1016/j.radphyschem.2007.06.006 [287] Ito H., IslamM., Radiat. Phys. Chem., 1994, 43, 545.https://doi.org/10.1016/0969-806X(94)90165-1 [288] Loo SCJ, Tan HT, Ooi CP, BoeyYCF. Hydrolytic degradation of electron beam irradiated high molecular weight and non-irradiated moderate molecular weight PLLA. Acta Biomater. 2006;2:287–96.https://doi.org/10.1016/j.actbio.2005.10.003 [289] CairnsM-L., Dickson G., Orr J. et al., Polym. Degrad. Stab.,2011, 96, 76. https://doi.org/10.1016/j.polymdegradstab.2010.10.016 [290] IAEA. Trends in Radiation Sterilization of Health Care Products. 2008. http://wwwpub.iaea.org/books/IAEABooks/7691/Trends-in-Radiation-Sterilization-of-Health-Care-Products. Accessed 4 Sep 2017. [291]Mazor E., ZilbermanM., Polym. Adv. Technol., 2017, 28, 565.https://doi.org/10.1002/pat.4054 [292] Ghafoor B., MehmoodM., Shahid U. et al., Radiat. Phys. Chem., 2016, 125, 145.https://doi.org/10.1016/j.radphyschem.2016.04.004 [293] Gaston F., DupuyN., Marque S. et al., Radiat. Phys. Chem.,2016, 125, 115. https://doi.org/10.1016/j.radphyschem.2016.03.010 [294] ZhaoW., Lu Y., Zhou L. et al., J.Mater. Sci., 2016, 51, 7073.https://doi.org/10.1007/s10853-016-9875-x [295] Šarac T., QuiévyN., Gusarov A., KonstantinovićM., Radiat. Phys. Chem., 2016, 125, 151.https://doi.org/10.1016/j.radphyschem.2016.03.024 [296] Jo S-Y., Park J-S., Gwon H-J. et al., Radiat. Phys. Chem., 2012,81, 846. https://doi.org/10.1016/j.radphyschem.2012.03.013 [297] Urbanek O., Pierini F., Choińska E. et al., Polym. Compos.,2016, https://doi.org/10.1002/pc.24028 [298] Dai Y., Xia Y., Chen H-B. et al., J. Bioact. Compat. Polym. Biomed. Appl., 2016, 31, 152.https://doi.org/10.1177/0883911515598795 [299] Zembouai I., Kaci M., Bruzaud S. et al., Polym. Test., 2016, 49,29. https://doi.org/10.1016/j.polymertesting.2015.11.003 [300] Escudero-Castellanos A., Ocampo-García B., Domínguez- García M. et al., J.Mater. Sci.Mater.Med., 2016, 27, 176.https://doi.org/10.1007/s10856-016-5793-3 [301] Dai Z., Ronholm J., Tian Y. et al., J. Tissue Eng., 2016, 7,2041731416648810. https://doi.org/10.1177/2041731416648810 [302] Song C., Yoshii F., Kume T., J. Macromol. Sci. A, 2001, 38,961. https://doi.org/10.1081/MA-100104947 [303] Song J., RenM., Song C. et al., Polym. Int., 2004, 53, 1773.https://doi.org/10.1002/pi.1579 [304] Khan R., Dussault D., Salmieri S. et al., J. Appl. Polym. Sci.,2013, 127, 3962. https://doi.org/10.1002/app.37715 [305] Augustine R., Saha A., Jayachandran V. et al., Int. J. Polym. Mater. Polym. Biomater., 2015, 4, 526.https://doi.org/10.1080/00914037.2014.977900 [306] Luk J., Cooper-White J., Rintoul L. et al., J. Mater. Chem. B,2013, 1, 4171. https://doi.org/10.1039/P.3tb20267d [307] Jeong J-O., Jeong S., Shin Y. et al., Polym. Korea, 2015, 39,418. https://doi.org/10.7317/pk.2015.39.3.418 [308] Keles H., Naylor A., Clegg F., Sammon C., Polym. Degrad. Stab., 2015, 119, 228.https://doi.org/10.1016/j.polymdegradstab.2015.04.025 [309]Martı́nez-Sancho C., Herrero-Vanrell R., Negro S., J. Control. Release, 2004, 99, 41. https://doi.org/10.1016/j.jconrel.2004.06.004 [310] SimpsonM., Gilmore B.,Miller A. et al., Rad. Phys. Chem.,2014, 94, 211. https://doi.org/10.1016/j.radphyschem.2013.09.002 [311] Chakoli A., He J., ChayjanM. et al., RSC Adv., 2015, 5, 55544.https://doi.org/10.1039/P.5RA08319B [312] Shahabi S., Najafi F.,Majdabadi A. et al., Sci. World J., 2014,2014, e420616. https://doi.org/10.1155/2014/420616 [313] Oliveira L., Araujo P., Araujo E.:Mater. Res., 2013, 16, 195.https://doi.org/10.1590/S1516-14392012005000173 [314] Khalil A., AlbachirM., Odeh A., Polycycl. Aromat. Compd.,2016, 36, 873. https://doi.org/10.1080/10406638.2015.1042551 [315] Liu Y., Zhai Y., CaoW. et al.:MATECWeb Conf., 2016, 67,01004. https://doi.org/10.1051/matecconf/20166701004 [316] IgartuaM., Hernández R., Rosas J. et al., Eur. J. Pharm. Biopharm., 2008, 69, 519. https://doi.org/10.1016/j.ejpb.2007.12.014 [317] Desai K-GH., Kadous S., Schwendeman S., Pharm. Res., 2013,30, 1768. https://doi.org/10.1007/s11095-013-1019-2 [318] Fernandes-Cunha G., Rezende C.,MusselW. et al: J. Mater. Sci. Mater.Med., 2016, 27, 10. https://doi.org/10.1007/s10856-015-5621-1 [319] Bozdag S., Su H., Il. Farm., 2002, 57, 55.https://doi.org/10.1016/S0014-827X(01)01171-5 [320] Ninaya Z., Hamid Z., Ahmad Z. et al., Procedia Chem., 2016,19, 373. https://doi.org/10.1016/j.proche.2016.03.026 [321] Erdemli Ö., Usanmaz A., Keskin D., Tezcaner A., Colloid. Surface B, 2014, 117, 487.https://doi.org/10.1016/j.colsurfb.2014.01.037 [322] Keles H., Naylor A., Clegg F., Sammon C.:Vib. Spectrosc.,2014, 71, 76. https://doi.org/10.1016/j.vibspec.2014.01.012 [323] Thomarayil Mathew S., Devi Subbiah G., Viswanadhan Vasantha P., Balan V., Curr. Drug Deliv., 2013, 10, 158.https://doi.org/10.2174/1567201811310020002 [324]Mohanan D., Gander B., Kündig T., Johansen P., Eur. J. Pharm. Biopharm., 2012, 80, 274. https://doi.org/10.1016/j.ejpb.2011.10.007 [325] Sarigöl E., Pehlivan S., EkizoğluM. et al., Pharm. Dev. Technol., 2017, 22, 706.https://doi.org/10.3109/10837450.2015.1102280 [326] Checa-Casalengua P., Jiang C., Bravo-Osuna I. et al., Int. J. Pharm., 2012, 436, 545. https://doi.org/10.1016/j.ijpharm.2012.07.019 [327] Erdemli Ö., Keskin D., Tezcaner A.:Mater. Sci. Eng. C, 2015,48, 391. https://doi.org/10.1016/j.msec.2014.12.044 [328] Dorati R., Genta I.,Montanari L. et al., J. Control. Release,2005, 107, 78. https://doi.org/10.1016/j.jconrel.2005.05.029 [329] IgartuaM., Hernández R., Rosas J. et al., Eur. J. Pharm. Biopharm., 2008, 69, 519. https://doi.org/10.1016/j.ejpb.2007.12.014 [330] Selmin F., Puoci F., Parisi O. et al., J. Funct. Biomater., 2015, 6,1. https://doi.org/10.3390/jfb6010001 [331] Rajawat G., Shinde U., Nair H., J. Drug Deliv. Sci. Technol.,2016, 35, 333. https://doi.org/10.1016/j.jddst.2016.08.006

Rights	© Національний університет „Львівська політехніка“, 2018 ©da Costa R., Pereira E., Silva F., de Jesus E., Souza Jr. F., 2018

Format	473-487 15 application/pdf image/png

Coverage	Lviv

Publisher	Lviv Politechnic Publishing House

Ім'я користувача
Пароль
Запам'ятати мене