ANALYSIS OF THE TECHNOLOGICAL FACTORS INFLUENCE ON RESPONSE FUNCTION OF THE COPLANAR CAPACITIVE SHAFT BEATING SENSOR
In the paper presents results of analysis of the influence of the thickness of the dielectric substrate of a capacitive beating sensor, the electrodes of which are made of foil dielectric type FR4, on the transformation function of the sensor by methods of computer modeling are presented. The result...
Збережено в:
Видавець: | Інститут електродинаміки Національної академії наук України |
---|---|
Дата: | 2021 |
Автори: | , |
Формат: | Стаття |
Мова: | Ukrainian |
Опубліковано: |
Інститут електродинаміки Національної академії наук України
2021
|
Теми: | |
Онлайн доступ: | https://prc.ied.org.ua/index.php/proceedings/article/view/37 |
Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Організація
Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraineid |
prciedorgua-article-37 |
---|---|
record_format |
ojs |
spelling |
prciedorgua-article-372021-09-27T13:32:22Z ANALYSIS OF THE TECHNOLOGICAL FACTORS INFLUENCE ON RESPONSE FUNCTION OF THE COPLANAR CAPACITIVE SHAFT BEATING SENSOR АНАЛІЗ ВПЛИВУ ТЕХНОЛОГІЧНИХ ФАКТОРІВ НА ФУНКЦІЮ ПЕРЕТВОРЕННЯ КОМПЛАНАРНОГО ЄМНІСНОГО СЕНСОРА БИТТЯ ВАЛІВ Березниченко , В.О. Підчібій, О.Є. гідрогенератор биття вала ємнісний сенсор технологічні фактори комп'ютерне моделювання hydrogenerator shaft beating capacitive sensor technological factors computer simulation In the paper presents results of analysis of the influence of the thickness of the dielectric substrate of a capacitive beating sensor, the electrodes of which are made of foil dielectric type FR4, on the transformation function of the sensor by methods of computer modeling are presented. The results of research by methods of computer modeling of the influence of the thickness of the dielectric substrate of a capacitive beating sensor, the electrodes of which are made of foil dielectric type FR4, on the transformation function of the sensor are presented. The studies were performed in the measurement range of the sensor with a change in the thickness of the dielectric selected from a standard line of material sizes. A comparative analysis method for manufacturing capacitive sensors using PCB technology was done. As a result of the analysis, the dependences of the influence of the thickness of the dielectric substrate on the conversion function of the capacitive sensor are obtained. Bibl. 20, fig. 2, table. Наведено результати дослідження методами комп'ютерного моделювання впливу товщини діелектричної підкладки ємнісного сенсора биття, електроди якого виготовлені з фольгованого діелектрика типу FR4, на функцію перетворення сенсора. Дослідження проводились в діапазоні вимірювання сенсора зі зміною товщина діелектрика, вибраної з стандартної лінійки розмірів матеріалу. Проведено порівняльний аналіз методів виготовлення ємнісних сенсорі з використанням технології друкованих плат. В результаті проведеного аналізу отримані залежності впливу товщини діелектричної підкладки на функцію перетворення ємнісного сенсора. Бібл. 20, рис. 2, таблиця. Інститут електродинаміки Національної академії наук України 2021-09-20 Article Article application/pdf https://prc.ied.org.ua/index.php/proceedings/article/view/37 10.15407/publishing2021.59.093 Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine; No. 59 (2021): Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine; 093 Праці Інституту електродинаміки Національної академії наук України; № 59 (2021): Праці Інституту електродинаміки Національної академії наук України; 093 2786-7064 1727-9895 10.15407/publishing2021.59 uk https://prc.ied.org.ua/index.php/proceedings/article/view/37/33 Авторське право (c) 2021 В.О. Березниченко , О.Є. Підчібій https://creativecommons.org/licenses/by-nc-nd/4.0 |
institution |
Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine |
collection |
OJS |
language |
Ukrainian |
topic |
гідрогенератор биття вала ємнісний сенсор технологічні фактори комп'ютерне моделювання hydrogenerator shaft beating capacitive sensor technological factors computer simulation |
spellingShingle |
гідрогенератор биття вала ємнісний сенсор технологічні фактори комп'ютерне моделювання hydrogenerator shaft beating capacitive sensor technological factors computer simulation Березниченко , В.О. Підчібій, О.Є. ANALYSIS OF THE TECHNOLOGICAL FACTORS INFLUENCE ON RESPONSE FUNCTION OF THE COPLANAR CAPACITIVE SHAFT BEATING SENSOR |
topic_facet |
гідрогенератор биття вала ємнісний сенсор технологічні фактори комп'ютерне моделювання hydrogenerator shaft beating capacitive sensor technological factors computer simulation |
format |
Article |
author |
Березниченко , В.О. Підчібій, О.Є. |
author_facet |
Березниченко , В.О. Підчібій, О.Є. |
author_sort |
Березниченко , В.О. |
title |
ANALYSIS OF THE TECHNOLOGICAL FACTORS INFLUENCE ON RESPONSE FUNCTION OF THE COPLANAR CAPACITIVE SHAFT BEATING SENSOR |
title_short |
ANALYSIS OF THE TECHNOLOGICAL FACTORS INFLUENCE ON RESPONSE FUNCTION OF THE COPLANAR CAPACITIVE SHAFT BEATING SENSOR |
title_full |
ANALYSIS OF THE TECHNOLOGICAL FACTORS INFLUENCE ON RESPONSE FUNCTION OF THE COPLANAR CAPACITIVE SHAFT BEATING SENSOR |
title_fullStr |
ANALYSIS OF THE TECHNOLOGICAL FACTORS INFLUENCE ON RESPONSE FUNCTION OF THE COPLANAR CAPACITIVE SHAFT BEATING SENSOR |
title_full_unstemmed |
ANALYSIS OF THE TECHNOLOGICAL FACTORS INFLUENCE ON RESPONSE FUNCTION OF THE COPLANAR CAPACITIVE SHAFT BEATING SENSOR |
title_sort |
analysis of the technological factors influence on response function of the coplanar capacitive shaft beating sensor |
title_alt |
АНАЛІЗ ВПЛИВУ ТЕХНОЛОГІЧНИХ ФАКТОРІВ НА ФУНКЦІЮ ПЕРЕТВОРЕННЯ КОМПЛАНАРНОГО ЄМНІСНОГО СЕНСОРА БИТТЯ ВАЛІВ |
description |
In the paper presents results of analysis of the influence of the thickness of the dielectric substrate of a capacitive beating sensor, the electrodes of which are made of foil dielectric type FR4, on the transformation function of the sensor by methods of computer modeling are presented. The results of research by methods of computer modeling of the influence of the thickness of the dielectric substrate of a capacitive beating sensor, the electrodes of which are made of foil dielectric type FR4, on the transformation function of the sensor are presented. The studies were performed in the measurement range of the sensor with a change in the thickness of the dielectric selected from a standard line of material sizes. A comparative analysis method for manufacturing capacitive sensors using PCB technology was done. As a result of the analysis, the dependences of the influence of the thickness of the dielectric substrate on the conversion function of the capacitive sensor are obtained. Bibl. 20, fig. 2, table. |
publisher |
Інститут електродинаміки Національної академії наук України |
publishDate |
2021 |
url |
https://prc.ied.org.ua/index.php/proceedings/article/view/37 |
work_keys_str_mv |
AT berezničenkovo analysisofthetechnologicalfactorsinfluenceonresponsefunctionofthecoplanarcapacitiveshaftbeatingsensor AT pídčíbíjoê analysisofthetechnologicalfactorsinfluenceonresponsefunctionofthecoplanarcapacitiveshaftbeatingsensor AT berezničenkovo analízvplivutehnologíčnihfaktorívnafunkcíûperetvorennâkomplanarnogoêmnísnogosensorabittâvalív AT pídčíbíjoê analízvplivutehnologíčnihfaktorívnafunkcíûperetvorennâkomplanarnogoêmnísnogosensorabittâvalív |
first_indexed |
2024-06-01T14:30:16Z |
last_indexed |
2024-06-01T14:30:16Z |
_version_ |
1804810636902793216 |