Preparation and characterization of jute fiber reinforced shellac biocomposites: effect of additive
Електронний науковий архів Науково-технічної бібліотеки Національного університету "Львівська політехніка"
Переглянути архів ІнформаціяПоле | Співвідношення | |
Title |
Preparation and characterization of jute fiber reinforced shellac biocomposites: effect of additive
Приготування і зміцнених шелакових характеристика біокомпозитів з джутового волокна: вплив додатків |
|
Creator |
Khan, Mubarak
Ghoshal, Sushanta Khan, Ruhul Pervin, Shamim-Ara Mustafa, Ahmed |
|
Subject |
jute
shellac biocomposite mechanical properties urea джут шелак біокомпозит механічні властивості |
|
Description |
Hessian cloth (jute fabrics) samples were soaked in the alcoholic shellac solution and dried at 333 K for 4 hours. Six layers of shellac treated hessian cloth were heat pressed (373 K for 10 min at 5 MT pressure) to fabricate biocomposite and then its mechanical properties were evaluated. To improve the mechanical properties of the biocomposite, a series of formulations was prepared using varying percentages of urea (0.25 to 30 %) with shellac in methanol; then the composite was fabricated using same parameters. Mechanical properties such as tensile strength (TS), bending strength (BS), tensile modulus (TM), bending modulus (BM), elongation at break (Eb), impact strength (IS) of the biocomposite were determined. Percentage of urea and soaking time of hessian cloth for the composites were optimized over mechanical properties. The biocomposite prepared with 0.5 % urea at 2 min soaking time showed the highest mechanical properties (TS – 79 MPa, BS – 74 MPa, BM – 7 GPa, IS – 13 kJ/m2 and Eb – 11.3 %). Scanning electron microscopic images of the fracture surface of the composites were suggested. |
|
Date |
2009-09-10T09:36:47Z
2009-09-10T09:36:47Z 2008 |
|
Type |
Article
|
|
Identifier |
Preparation and characterization of jute fiber reinforced shellac biocomposites: effect of additive / Mubarak Khan, Sushanta Ghoshal, Ruhul Khan, Shamim-Ara Pervin, Ahmed Mustafa // Chemistry & Chemical Technology. – 2008. – Volume 2, number 3. – P. 231–234. – Bibliography: 14 titles.
http://ena.lp.edu.ua:8080/handle/ntb/1380 |
|
Publisher |
Publishing House of Lviv Polytechnic National University
|
|