Запис Детальніше

Corrosion Resistance of AZ91 Magnesium Alloy with Pulse Electrodeposited Ni-SiC Nanocomposite Coating

Electronic Archive of Sumy State University

Переглянути архів Інформація
 
 
Поле Співвідношення
 
Title Corrosion Resistance of AZ91 Magnesium Alloy with Pulse Electrodeposited Ni-SiC Nanocomposite Coating
 
Creator Hajiali Fini, M.
Amadeh, A.
 
Subject Nanocomposite coating
Pulse electrodeposition
Corrosion resistance
 
Description Magnesium and its alloys are the lightest of the structural metals, which makes them one of the most
promising materials to minimize vehicle weight, but poor surface properties restrict the application of these alloys.
In this paper, Ni-SiC nanocomposite coatings were applied on AZ91 magnesium alloy from Watts bath
containing different amounts of SiC content by pulse electrodeposition technique. The morphology and phase
analysis were carried out by Scanning Electron Microscopy (SEM) and X-Ray Diffraction (XRD) analysis, respectively.
Microhardness of specimens was measured and the results revealed a significant enhancement from
74 H for bare AZ91 magnesium alloy to 523 HV for the specimen coated in the bath containing 15 g.L–1 SiC.
The Corrosion behavior of the samples was studied by potentiodaynamic polarization, and the obtained data
showed superior corrosion resistance for coated AZ91 magnesium alloy, i.e. the corrosion current density decreased
from 2.69 mA.cm–2, for the uncoated sample, to 0.00046 mA.cm–2, for coated specimen in the bath containing
15 g.L–1 SiC and the corrosion potential increased from – 2.069 V to – 0.33 V at the same conditions.
 
Publisher Видавництво СумДУ
 
Date 2012-03-28T11:55:42Z
2012-03-28T11:55:42Z
2012
 
Type Article
 
Identifier M. Hajiali Fini, A. Amadeh, J. Nano-Electron. Phys. 4 No 1, 01008 (2012)
http://essuir.sumdu.edu.ua/handle/123456789/24893
 
Language en