ПУТИ МОДЕРНИЗАЦИИ КОНСТРУКЦИЙ ПЛАНИРНОЙ ШТАНГИ
Електронний архів E-archive DonNTU – (Electronic archive Donetsk National Technical University)
Переглянути архів ІнформаціяПоле | Співвідношення | |
Title |
ПУТИ МОДЕРНИЗАЦИИ КОНСТРУКЦИЙ ПЛАНИРНОЙ ШТАНГИ
THE WAYS OF DESIGN MODERNIZATION OF LEVELING ARMS |
|
Creator |
Ильченко, Дарья Васильевна
Веретельний, Святослав Петрович |
|
Subject |
экологическая безопасность
повышение эффективности коксования планирная штанга угольная шихта плотность загрузки load density environment leveling arms coal blend |
|
Description |
Рассмотрен вопрос модернизации существующих конструкций планирной штанги для повышения плотности угольной загрузки в камерах коксования. Приведены сравнительные характеристики существующих конструкций планирных штанг.
The question of upgrading existing constructions of leveling arms to increase the density of the coal loading in the coking chambers. Comparative characteristics of existing constructions of leveling arms. Planning for the coal loading coke ovens is an important operation which largely depends on the effectiveness of the further process of coke production. Under the production efficiency of coke oven productivity meant cameras, improving the quality of coke, reducing the coke cost per ton and improves the environmental performance of the process. The planning process consists of the following: in the final stage of the boot under the boot of coking chamber holes are formed cones of charge while the holes are named void. It was at this moment and begins planning for and has tried many variations of alternating loading of the bunkers, and driving modes leveling arm. Previously the construction boom has been neglected in terms of increasing the density of loading. The main objective was to ensure strength and durability of the rod. Therefore, the bar was simple, cooked and made of relatively cheap steel. The low level of maintenance and reduced durability of the bar did not allow any way to control the planning process. Plan for coal blend can have a positive direct impact on the efficiency of the coke production provided the technology planning process and design leveling device and in particular leveling arm will meet the necessary requirements. The effect of increasing the density will intensify substantially when using at boot time in the furnace chamber of special design leveling devices. |
|
Date |
2013-04-11T16:34:43Z
2013-04-11T16:34:43Z 2013 |
|
Type |
Article
|
|
Identifier |
2074-6652
УДК 662.74: 66.028 http://ea.donntu.edu.ua/handle/123456789/18414 |
|
Relation |
Наукові праці ДонНТУ;Серія: Хімія і хіміна технологія, 2013. - Вип.1(20). - С.173-178
|
|
Publisher |
Донецк, ДонНТУ
|
|