Improving the efficiency of the dry coke quenching installation due to perfection of the distribution of cooling gas
Електронний архів E-archive DonNTU – (Electronic archive Donetsk National Technical University)
Переглянути архів ІнформаціяПоле | Співвідношення | |
Title |
Improving the efficiency of the dry coke quenching installation due to perfection of the distribution of cooling gas
|
|
Creator |
Golubev, A. V.
Toporov, A. A. Zbikovski, E. I. Alekseeva, O.E. Parfenyuk, A. S. |
|
Subject |
dry coke quenching
distributing device coolant gas |
|
Description |
An essential shortcoming of industrial dry coke-quenching installations is the presence of stagnation zones. That leads to magnification of capital outlays and losses of coke due to its partial gasification. It is offered to design a new chamber for the dry coke-quenching installation. Feed of coolant gas should be carried out through uniform channels over the cross-section chambers. Sizes of the channels should be small in comparison with the cross sizes of the quenching chamber. A study of these devices was conducted on cold physical models. The study results show that under gas withdrawal through peripheral channels decrease of a cone wind proof in the chamber central part is by approximately 30 %. Besides, this allows to provide uniform distribution of coolant gas over the quenching chamber volume. If the above advice distributing devices are implemented the coke motion is insured to be close to the ideal displacement mode. |
|
Date |
2017-03-01T09:44:26Z
2017-03-01T09:44:26Z 2015-05 |
|
Type |
Article
|
|
Identifier |
Всеукраїнський науковий збірник
2308-51312 http://ea.donntu.edu.ua/handle/123456789/28024 |
|
Language |
en
|
|
Relation |
Машинобудування і машинознавство;№1(12)
|
|
Publisher |
Донецький національний технічний університет
|
|