Запис Детальніше

Frequency Determination Method of the Sweep-Generator of the Panoramic Frequency Characteristics Meter

Вісник НТУУ "КПІ". Серія Радіотехніка, Радіоапаратобудування.

Переглянути архів Інформація
 
 
Поле Співвідношення
 
Title Frequency Determination Method of the Sweep-Generator of the Panoramic Frequency Characteristics Meter
Метод определения частоты свип-генератора панорамного измерителя частотных характеристик
Метод визначення частоти свіп-генератора панорамного вимірювача частотних характеристик
 
Creator Kononov, S. P.
Nehur, A. A.
 
Subject
frequency-response characteristic tracers; sweep-generator; frequency-time convert; stroboscopic mixer; reference oscillator; frequency mark

частотный характериограф; свип-генератор; частотно-временное преобразование; стробоскопический смеситель; опорный генератор; частотная метка
621.317
частотний характеріограф; свіп-генератор; частотно-часове перетворення; стробоскопічний змішувач; опорний генератор; частотна мітка
 
Description Usage of the panoramic meters of frequency-response characteristics or frequency-response characteristic tracers significantly increases work productivity of adjusters and operators of radioelectronic and telecommunication systems. One of the main functions of the frequency-response characteristic tracer is formation of frequency-response scale, that is determining sweep generator frequency, which is a part of it. High-quality frequency-response characteristic tracers must have little error of scale bars formation in the broad frequency range, automatically and independently define their frequency of the swing band of the sweep generator. There is a basic structural scheme of the sweep generator frequency meter with a single-channel frequency-time converter, the main units of which include two reference-frequency generators and stroboscopic mixer. It is proved that usage of reference-frequency generators on quartz-crystal resonators reduces to zero the error component of frequency defining, provided by frequency instability of the generator. To compensate the deflection non-linearity influence of the sweep generator on frequency determination accuracy, the basic scheme of the meter was added with the third reference-frequency generators, as well as the operating procedure of the control and evaluation unit was changed. The evaluating formulas were received for the sweep generator frequency, on their basis the mathematical models for deflection non-linearity cases were created. As a result of the analysis it was found that in the new meter in comparison with the basic one the error component of frequency determination of the sweep generator caused by deflection non-linearity is decreased by times. Interrelation between the multiplication factor and deflection non-linearity coefficient was found, it can be used by designing of the sweep generator frequency meter and formation of the requirements to frequencies of reference-frequency generators. The developed meter with a single-channel frequency-time converter can be used in high-frequency characteristic tracers of 20 GHz and higher range. Its advantages include: simplicity, absence of fast-speed units, except for the stroboscopic mixer, transfer of measurements to great time range, that is to low frequencies.
В статье на основе известного метода с двумя опорными генераторами приведена базовая структурная схема измерителя частоты СВИП-генератора с одноканальным частотно-временным преобразователем, основным узлом которого является стробоскопический смеситель. Доказано, что использование как опорных генераторов на кварцевых резонаторах существенно снижает влияние составляющей погрешности определения частоты, которая обусловлена частотной нестабильностью генераторов. Усовершенствован метод с двумя опорными генераторами, базовая структурная схема измерителя дополнена третьим опорным генератором. Установлено, что применение усовершенствованного метода уменьшает на порядок составляющую погрешности определения частоты свип-генератора, которая вызвана нелинейностью развертки,. Найдена взаимосвязь между множителем и коэффициентами нелинейности развертки свип-генератора, которая может быть использована при проектировании измерителя для формирования требований к частотам опорных генераторов.
В статті на основі відомого методу з двома опорними генераторами наведено базову структурну схему вимірювача частоти СВІП-генератора з одноканальним частотно-часовим перетворювачем, основним вузлом якого є стробоскопічний змішувач. Доведено, що використання як опорних генераторів на кварцових резонаторах суттєво знижує вплив складової похибки визначення частоти, яка обумовлена частотною нестабільністю генераторів. Вдосконалено метод з двома опорними генераторами, базову структурну схему вимірювача доповнено третім опорним генератором. Встановлено, що при застосуванні вдосконаленого методу складова похибки визначення частоти свіп-генератора, яка викликана нелінійністю розгортки, зменшується на порядок. Знайдено взаємозв’язок між множником та коефіцієнтами нелінійності розгортки свіп-генератора, який може бути використаний при проектуванні вимірювача для формування вимог до частот опорних генераторів.
 
Publisher National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute"
 
Contributor


 
Date 2017-09-30
 
Type info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion



 
Format application/pdf
 
Identifier http://radap.kpi.ua/radiotechnique/article/view/1425
 
Source BULLETIN of National Technical University of Ukraine. Series RADIOTECHNIQUE. RADIOAPPARATUS BUILDING; № 70 (2017); 23-29
Вестник НТУУ "КПИ". Серия Радиотехника, Радиоаппаратостроение; № 70 (2017); 23-29
Вісник НТУУ "КПІ". Серія Радіотехніка, Радіоапаратобудування; № 70 (2017); 23-29
2310-0389
2310-0397
 
Language ukr
 
Relation http://radap.kpi.ua/radiotechnique/article/view/1425/1309
 
Rights ##submission.copyrightStatement##
http://creativecommons.org/licenses/by/4.0