Catalysts of aldol condensation of acetic acid with formaldehyde
Електронний науковий архів Науково-технічної бібліотеки Національного університету "Львівська політехніка"
Переглянути архів Інформація| Поле | Співвідношення | |
| Title |
Catalysts of aldol condensation of acetic acid with formaldehyde
|
|
| Creator |
Shpyrka, Iryna
Nebesnyi, Roman Sydorchuk, Volodymyr Khalameida, Svitlana Ivasiv, Volodymyr Zavalii, Kateryna |
|
| Contributor |
Lviv Polytechnic National University
Institute for Sorption and Problems of Endoecology of NAS of Ukraine |
|
| Subject |
acrylic acid
aldol condensation mechanochemical treatment hydrothermal treatment porous structure |
|
| Description |
It had been demonstrated that mechanochemical and hydrothermal treatment of support allows increasing activity and selectivity of the catalyst in the studied process. Hydrothermal treatment (HTT) of silica increases mechanical strength of silica gel granules subjected to hydrothermal treatment, also reduction of coke formation takes place, as well as prolongation of the catalysts life. Similarly, the same approaches allow to optimize the pore structure of titanium phosphates. |
|
| Date |
2018-04-12T13:06:21Z
2018-04-12T13:06:21Z 2017-12-23 2017-12-23 |
|
| Type |
Conference Abstract
|
|
| Identifier |
Catalysts of aldol condensation of acetic acid with formaldehyde / Iryna Shpyrka, Roman Nebesnyi, Volodymyr Sydorchuk, Svitlana Khalameida, Volodymyr Ivasiv, Kateryna Zavalii // Litteris et Artibus : proceedings, 23–25 November, 2017. — Lviv : Lviv Polytechnic Publishing House, 2017. — P. 76–77. — (6th International academic conference «Chemistry & chemical technology 2017» (CCT-2017)).
978-966-941-108-2 http://ena.lp.edu.ua:8080/handle/ntb/40478 Catalysts of aldol condensation of acetic acid with formaldehyde / Iryna Shpyrka, Roman Nebesnyi, Volodymyr Sydorchuk, Svitlana Khalameida, Volodymyr Ivasiv, Kateryna Zavalii // Litteris et Artibus : proceedings, 23–25 November, 2017. — Lviv : Lviv Polytechnic Publishing House, 2017. — P. 76–77. — (6th International academic conference «Chemistry & chemical technology 2017» (CCT-2017)). |
|
| Language |
en
|
|
| Relation |
Litteris et Artibus : матеріали, 2017
Litteris et Artibus : proceedings, 2017 [1] H. Danner, M. Ürmös, M. Gartner, R. Braun, “Biotechnological Production of Acrylic Acid from Biomass”, Applied Biochemistry and Biotechnology, vol. 70, pp. 887-894, 2008,doi:10.1007/BF02920199. [2] Cuncun Zuo, Yaping Li, Chunshan Li, Shasha Cao, Haoyu Yao, Suojiang Zhang, “Thermodynamics and separation process for quaternary acrylic systems”, AlChE J., 62, 228–240, 2015, doi:10.1002/aic.15015. [3] Valentina T.Shashkova, Irina A.Matveeva, Nikolay N.Glagolev, Tatyana S.Zarkhina, Anastasiya V.Cherkasova, Svetlana L.Kotova, Peter S.Timashev, Anna B.Solovieva, “Synthesis of polylactide acrylate derivatives for the preparation of 3D structures by photo-curing”. Mendeleev Communications, , vol. 26, pp. 418-420, 2016doi: 10.1016/j.mencom.2016.09.018. [4] Killian Flégeau, Richard Pace, HélèneGautier, Gildas Rethore, Jerome Guicheux, Catherine Le Visage, PierreWeiss, “Toward the development of biomimetic injectable and macroporous biohydrogels for regenerative medicine”, Advances in Colloid and Interface Science, 2017,doi: 10.1016/j.cis.2017.07.012. [5] X. Li, Y. Zhang, “Highly Efficient Process for the Conversion of Glycerol to Acrylic Acid via Gas Phase Catalytic Oxidation of an Allyl Alcohol Intermediate”, ACS Catalysis, vol. 6, pp. 143-150, 2016, doi: 10.1021/acscatal.5b01843. [6] Zhyznevs'kyy V.M., Nebesnyy R.V., Ivasiv V.V., S. V. Shybanov. “Obtaining of acrylic monomers by gas-phased catalytic condensation of carbonyl compounds in gas phase”, Reports of NAS Ukraine, vol. 10, pp. 114–118, 2010. [7] Patent 0343319 US, Process for preparing acrylic acid with high space-time ield / M. Goebel // BASF SE., filing date: 18.05.2013; publication date: 08.04.2014. [8] R.V. Nebesnyi, V.V. Ivasiv, V.M. Zhyznevskyy, S.V. Shybanov, S.V. Maykova, “Condensation of acetic acid with formaldehyde to acrylic acid over B-P-Mo-Cs-Ox catalysts in the gas phase”, Visnyk NU ”LP” “Chemistry, technology of substances and their applications”, no 667, pp. 196-199, 2010. [9] R. Nebesnyi, V. Ivasiv, Y. Dmytruk, N. Lapychak, “Acrylic acid obtaining by acetic acid catalytic condensation with formaldehyde”, Eastern- European Journal of Enterprise Technologies, Vol. 6, no 6(66), pp. 40-42, 2013. [10] V.V. Ivasiv, Z.G. Pikh, V.M. Zhyznevskyy, R.V. Nebesnyi, “Physical-chemical properties of surface of B2O3 – P2O5 – МеOх/SiO2 catalysts and their influence on parameters of propionic acid aldol condensation with formaldehyde”, Reports of NASc of Ukraine, no. 11, pp. 126-130, 2011. [11] E. Skwarek, S. Khalameida, W. Janusz, V. Sydorchuk, N. Konovalova, V. Zazhigalov, J. Skubiszewska- Zięba, R. Leboda Influence of mechanochemical activation on structure and some properties of mixed vanadium-molybdenum oxides. Journal of Thermal Analysis and Calorimetry, vol.106, no3, pp.881-894, 2011. [12] J. Skubiszewska-Zieba, S. Khalameida, V. Sydorchuk. Comparison of surface properties of silica xero- and hydrogels hydrothermally modified using mechanochemical, microwave and classical methods. Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 504, pp. 139-153, 2016. [1] H. Danner, M. Ürmös, M. Gartner, R. Braun, "Biotechnological Production of Acrylic Acid from Biomass", Applied Biochemistry and Biotechnology, vol. 70, pp. 887-894, 2008,doi:10.1007/BF02920199. [2] Cuncun Zuo, Yaping Li, Chunshan Li, Shasha Cao, Haoyu Yao, Suojiang Zhang, "Thermodynamics and separation process for quaternary acrylic systems", AlChE J., 62, 228–240, 2015, doi:10.1002/aic.15015. [3] Valentina T.Shashkova, Irina A.Matveeva, Nikolay N.Glagolev, Tatyana S.Zarkhina, Anastasiya V.Cherkasova, Svetlana L.Kotova, Peter S.Timashev, Anna B.Solovieva, "Synthesis of polylactide acrylate derivatives for the preparation of 3D structures by photo-curing". Mendeleev Communications, , vol. 26, pp. 418-420, 2016doi: 10.1016/j.mencom.2016.09.018. [4] Killian Flégeau, Richard Pace, HélèneGautier, Gildas Rethore, Jerome Guicheux, Catherine Le Visage, PierreWeiss, "Toward the development of biomimetic injectable and macroporous biohydrogels for regenerative medicine", Advances in Colloid and Interface Science, 2017,doi: 10.1016/j.cis.2017.07.012. [5] X. Li, Y. Zhang, "Highly Efficient Process for the Conversion of Glycerol to Acrylic Acid via Gas Phase Catalytic Oxidation of an Allyl Alcohol Intermediate", ACS Catalysis, vol. 6, pp. 143-150, 2016, doi: 10.1021/acscatal.5b01843. [6] Zhyznevs'kyy V.M., Nebesnyy R.V., Ivasiv V.V., S. V. Shybanov. "Obtaining of acrylic monomers by gas-phased catalytic condensation of carbonyl compounds in gas phase", Reports of NAS Ukraine, vol. 10, pp. 114–118, 2010. [7] Patent 0343319 US, Process for preparing acrylic acid with high space-time ield, M. Goebel, BASF SE., filing date: 18.05.2013; publication date: 08.04.2014. [8] R.V. Nebesnyi, V.V. Ivasiv, V.M. Zhyznevskyy, S.V. Shybanov, S.V. Maykova, "Condensation of acetic acid with formaldehyde to acrylic acid over B-P-Mo-Cs-Ox catalysts in the gas phase", Visnyk NU "LP" "Chemistry, technology of substances and their applications", no 667, pp. 196-199, 2010. [9] R. Nebesnyi, V. Ivasiv, Y. Dmytruk, N. Lapychak, "Acrylic acid obtaining by acetic acid catalytic condensation with formaldehyde", Eastern- European Journal of Enterprise Technologies, Vol. 6, no 6(66), pp. 40-42, 2013. [10] V.V. Ivasiv, Z.G. Pikh, V.M. Zhyznevskyy, R.V. Nebesnyi, "Physical-chemical properties of surface of B2O3 – P2O5 – MeOkh/SiO2 catalysts and their influence on parameters of propionic acid aldol condensation with formaldehyde", Reports of NASc of Ukraine, no. 11, pp. 126-130, 2011. [11] E. Skwarek, S. Khalameida, W. Janusz, V. Sydorchuk, N. Konovalova, V. Zazhigalov, J. Skubiszewska- Zięba, R. Leboda Influence of mechanochemical activation on structure and some properties of mixed vanadium-molybdenum oxides. Journal of Thermal Analysis and Calorimetry, vol.106, no3, pp.881-894, 2011. [12] J. Skubiszewska-Zieba, S. Khalameida, V. Sydorchuk. Comparison of surface properties of silica xero- and hydrogels hydrothermally modified using mechanochemical, microwave and classical methods. Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 504, pp. 139-153, 2016. |
|
| Rights |
© Національний університет “Львівська політехніка”, 2017
|
|
| Format |
76-77
2 application/pdf image/png |
|
| Coverage |
23–25 листопада 2017 року
23–25 November, 2017 Львів Lviv |
|
| Publisher |
Видавництво Львівської політехніки
Lviv Polytechnic Publishing House |
|