Optimisation of inductor parameters for uniform heating of discs across the width of the hardfacing zone, allowing for screening
CUNTUR
Переглянути архів Інформація| Поле | Співвідношення | |
| Title |
Optimisation of inductor parameters for uniform heating of discs across the width of the hardfacing zone, allowing for screening
Оптимизация параметров индуктора для равномерного нагрева дисков по ширине зоны наплавления с учетом экранирования Оптимізація параметрів індуктора для рівномірного нагріву дисків по ширині зони наплавлення з урахуванням екранування |
|
| Creator |
Shably, O.M.
Pulka, Ch.V. Pismenny, A.S. Шаблій, Олег Миколайович Пулька, Чеслав Вікторович Письменний, О.С. |
|
| Contributor |
Ivan Pulyuj Ternopil State Technical University, Ternopil, Ukraine
The E.O. Paton Electric Welding Institute, NASU, Kyiv, Ukraine |
|
| Subject |
induction hardfacing
steel discs optimization of parameters two-turn ring-type inductors protective shields investigations calculation |
|
| Description |
Method of calculation and optimizing of parameters of inductor for hard facing edges of discs of an arbitrary diameter and width of the hard facing zone with allowance for the effect of electromagnetic and heat screening on the distribution of electromagnetic field power in the hardfacing zone width is presented. |
|
| Date |
2015-11-07T10:05:45Z
2015-11-07T10:05:45Z 2002 |
|
| Type |
Article
|
|
| Identifier |
O.M. Shably
Ch.V. Pulka
and
A.S. Pismenny. Optimisation of inductor parameters for uniform heating of discs across the width of the hardfacing zone, allowing for screening. The Paton Welding Journal. 11/2002. P. 23-25.
http://elartu.tntu.edu.ua/handle/123456789/6145 |
|
| Language |
en
|
|
| Relation |
Автоматическая сварка
The Paton Welding Journal 1. Tkachev, V.N. (1971) Wear and increase of service life of agricultural machinery. Moscow: Mashinostroenie. 2. Shably, O., Pulka, Ch.V., Pismenny, A. (1997) Optimisation of design parameters of inductor for induction hardfacing of thin steel discs. Avtomatich. Svarka, 6, 17-20. 3. Lozinsky, M.G. (1958) Industrial application of induction heating. Moscow : ANSSSR. 4. Shably, O.M., Pulka, Ch.V., Budzan. B.P. (1987) Optimisation of power inputs during induction hardfacing of thin-walled shaped discs. Avtomatich. Svarka, 1 , 36-39. |
|
| Format |
23-25
|
|