Запис Детальніше

Numerical analysis of steel frame subjected to air blast

Електронний науковий архів Науково-технічної бібліотеки Національного університету "Львівська політехніка"

Переглянути архів Інформація
 
 
Поле Співвідношення
 
Title Numerical analysis of steel frame subjected to air blast
Числьний аналіз сталевих рам під впливом пориву вітру
 
Creator Полянський, Т.
Томко, М.
Кметь, С.
Polanský, T.
Tomko, M.
Kmeť, S.
 
Contributor Технічний університет в Кошице, Словаччина, факультет будівництва, інститут будівельних конструкцій
Technical University of Košice, Faculty of Civil Engineering, Institute of Structural Engineering
 
Subject сталь
рама
порив вітру
механізм руйнування
явна динаміка
: steel
frame
air blast
damage mechanics
explicit dynamics
 
Description Робота присвячена чисельному аналізу сталевої рами, на яку впливає поривисте
повітряне навантаженню. ПК ABAQUS/Explicit був використаний для створення моделі
3D-кінцевих елементів. Двоповерховий сталевий каркас був дискретизований обємними
елементами. Навантаження від пориву вітру було згенеровано за допомогою генератора
CONWEP. Було розглянуто 3 різні маси ТНТ.
The paper focuses on the numerical analysis of steel frame subjected to air blast load.
ABAQUS/Explicit was employed to establish 3D finite element model. Two-storey steel frame
was discretized with solid elements. Air blast load was generated using CONWEP generator. 3
different weight of TNT was considered
 
Date 2019-02-13T14:55:06Z
2019-02-13T14:55:06Z
2018-02-26
2018-02-26
 
Type Article
 
Identifier Polanský T. Numerical analysis of steel frame subjected to air blast / T. Polanský, M. Tomko, S. Kmeť // Вісник національного університету “Львівська політехніка”. Серія: Теорія і практика будівництва. — Львів : Видавництво Львівської політехніки, 2017. — № 877. — С. 273–278.
http://ena.lp.edu.ua:8080/handle/ntb/44211
Polanský T. Numerical analysis of steel frame subjected to air blast / T. Polanský, M. Tomko, S. Kmeť // Visnyk natsionalnoho universytetu "Lvivska politekhnika". Serie: Teoriia i praktyka budivnytstva. — Vydavnytstvo Lvivskoi politekhniky, 2017. — No 877. — P. 273–278.
 
Language en
 
Relation Вісник національного університету “Львівська політехніка”. Серія: Теорія і практика будівництва, 877, 2017
1. Ali Kazemi-Moghaddam, Mehrdad Sasani, Progressive collapse evaluation of Murrah Federal Building following sudden loss of column G20, Engineering Structures, Volume 89, 2015, Pages 162–171, ISSN 0141-0296;
2. Lukasz Mazurkiewicz, Jerzy Malachowski, Pawel Baranowski, Blast loading influence on load carrying capacity of I-column, Engineering Structures, Volume 104, 2015, Pages 107–115, ISSN 0141-0296.
3. Yang Ding, Ming Wang, Zhong-Xian Li, Hong Hao, Damage evaluation of the steel tubular column subjected to explosion and post-explosion fire condition, Engineering Structures, Volume 55, 2013, Pages 44-55, ISSN 0141-0296.
4. Kinney, Gilbert F., Graham, Kenneth J., EXPLOSIVE SHOCKS IN AIR, SECOND EDITION. (1985) Explos Shocks in Air, Second Ed., 269 p.
5. T. Børvik, A. G. Hanssen, M. Langseth, L. Olovsson, Response of structures to planar blast loads – A finite element engineering approach, Computers & Structures, Volume 87, Issue 9, 2009, Pages 507–520, ISSN 0045-7949.
6. H. M. Elsanadedy, T. H. Almusallam, Y. R. Alharbi, Y. A. Al-Salloum, H. Abbas, Progressive collapse potential of a typical steel building due to blast attacks, Journal of Constructional Steel Research, Volume 101, 2014, Pages 143-157, ISSN 0143-974X.
7. Daniele Forni, Bernardino Chiaia, Ezio Cadoni, Blast effects on steel columns under fire conditions, Journal of Constructional Steel Research, Volume 136, 2017, Pages 1–10, ISSN 0143-974X.
8. Hyde, D. (1992), ConWep-Application of TM5-855-1, Structural Mechanics Division, Structures Laboratory, USAE Waterways Experiment Station, Vicksburg, MS.
9. SIMULIA 2014a. Abaqus 6.14 Theory Guide, Providence, Rhode Island, USA., SIMULIA, Dassault Systèmes, 2014.
1. Ali Kazemi-Moghaddam, Mehrdad Sasani, Progressive collapse evaluation of Murrah Federal Building following sudden loss of column G20, Engineering Structures, Volume 89, 2015, Pages 162–171, ISSN 0141-0296;
2. Lukasz Mazurkiewicz, Jerzy Malachowski, Pawel Baranowski, Blast loading influence on load carrying capacity of I-column, Engineering Structures, Volume 104, 2015, Pages 107–115, ISSN 0141-0296.
3. Yang Ding, Ming Wang, Zhong-Xian Li, Hong Hao, Damage evaluation of the steel tubular column subjected to explosion and post-explosion fire condition, Engineering Structures, Volume 55, 2013, Pages 44-55, ISSN 0141-0296.
4. Kinney, Gilbert F., Graham, Kenneth J., EXPLOSIVE SHOCKS IN AIR, SECOND EDITION. (1985) Explos Shocks in Air, Second Ed., 269 p.
5. T. Børvik, A. G. Hanssen, M. Langseth, L. Olovsson, Response of structures to planar blast loads – A finite element engineering approach, Computers & Structures, Volume 87, Issue 9, 2009, Pages 507–520, ISSN 0045-7949.
6. H. M. Elsanadedy, T. H. Almusallam, Y. R. Alharbi, Y. A. Al-Salloum, H. Abbas, Progressive collapse potential of a typical steel building due to blast attacks, Journal of Constructional Steel Research, Volume 101, 2014, Pages 143-157, ISSN 0143-974X.
7. Daniele Forni, Bernardino Chiaia, Ezio Cadoni, Blast effects on steel columns under fire conditions, Journal of Constructional Steel Research, Volume 136, 2017, Pages 1–10, ISSN 0143-974X.
8. Hyde, D. (1992), ConWep-Application of TM5-855-1, Structural Mechanics Division, Structures Laboratory, USAE Waterways Experiment Station, Vicksburg, MS.
9. SIMULIA 2014a. Abaqus 6.14 Theory Guide, Providence, Rhode Island, USA., SIMULIA, Dassault Systèmes, 2014.
 
Rights © Національний університет “Львівська політехніка”, 2017
© Полянський Т., Томко М., Кметь С., 2017
 
Format 273-278
6
application/pdf
image/png
 
Coverage Львів
 
Publisher Видавництво Львівської політехніки