Запис Детальніше

RESEARCH OF CORROSIVE DAMAGE TO THE PURPOSE OF FOOD PRODUCTION

Наукові журнали НАУ

Переглянути архів Інформація
 
 
Поле Співвідношення
 
Title RESEARCH OF CORROSIVE DAMAGE TO THE PURPOSE OF FOOD PRODUCTION
КОРОЗІЙНІ УШКОДЖЕННЯ ТРУБОК ВИПАРНИХ АПАРАТІВ ХІМІЧНИХ І ХАРЧОВИХВИРОБНИЦТВ
 
Creator Бойко, Андрій Васильович
Кулик, Василь Петрович
Макаренко, Валерій Дмитрович
Тараборкін, Леонід Анатолійович
 
Subject corrosion; degradation; waterheaters; structure; strength

корозія; деградація; водопідігрівачі; структура; міцність
УДК622.692.052.5
 
Description Chemical and food processing environments contain chemically active ingredients such as oxygen, carbon dioxide (СО2), carbon monoxide (CO), sulfur, hydrogen, carbon acid ion and sulfuric acid ion, chlorine ions, impurities of calcium carbonate, iron, and hydrochloric acid, etc. All these factors lead to intensive corrosion of the equipment, reducing its reliability and durability. The corrosion-mechanical resistance of metal equipment, such as chemical and sugar plants, is of great importance for environmental and sanitary requirements that make it impossible to contaminate the product with metal ions. First of all, the tubes of evaporation stations, diffusion apparatuses and steam boilers of chemical and agro-processing (sugar) enterprises are exposed to corrosive damage caused by the negative influence of high-temperature and corrosive-active steam under high pressure. Significantly worsens this negative situation and deposition of sediments of salts, carbonates, acids, and others. The analysis of corrosives damages suggests that predominantly point and pitting corrosion predominate, which are exacerbated by internal or external loads. Unlike uniform corrosion, finding and slowing down which is not a particular difficulty, these types of corrosion are usually detected only after they are caused by emergency failures or fractures. Therefore, the main reasons for failures of technical facilities, among which the important placeis the destruction or operation of corrosion and corrosion and mechanical damage, must be carefully investigated and, if possible, eliminated on time. The complex of investigations of the damaged metal of evaporator tubes (steel 20 and 06X1) with a life time (from 0 to 20 years) included, along with standard, also special types of research, in particular: various variants of X-ray spectral analysis using a raster electron microscope "JSM-35CF" (Jeol, Japan),"SEM-515" with Philips microinalyzer "Link" scanning Auger electron spectroscopy (micro-analyzer "AES-2000"). In addition, the content and character of the distribution in the metal of pipes of water heaters of hydrogen, sulfur and oxygen were determined by the method of local mass spectral analysis with a laser microprobe, as well as by the method of melting of metal samples in the flow of carrier gas using the installation of the firm "Leco". With the help of high-precision metallographic experimental equipment, the mechanism of corrosion damage to the surfaces of evaporator tubes and the proposed measures for further research on methods for reducing the corrosion activity of the process environment and the adhesion of salt and carbonate sediments to the surface of the tubes of steam generators of food production is investigated. In particular, it has been shown that in order to eliminate metal corrosion and deposits of salt sediments in the form of scale on the surface of pipes of water heaters, it is necessary simultaneously to reduce the chemical activity of the water-vapor environment using different reagents, and to cover the tube with anticorrosive protective.
За допомогою високоточного металографічного експериментального устаткування досліджені механізми корозійних ушкоджень поверхонь  трубок випарних апаратів та запропоновані заходи щодо подальших досліджень методів зниження корозійної  активності технологічного середовища і зчеплення осадів солей та карбонатів (накипи) з поверхнею трубок парових апаратів хімічного та харчового виробництва. Зокрема, показано, що для усунення корозії металу та відкладень осадів солей у вигляді накипу на поверхні трубок водопідігрівачів необхідно одночасно знижувати хімічну активність водопарового середовища з використанням різних реагентів, а трубки покривати антикорозійним захисним шаром.
 
Publisher National Aviation University
 
Contributor

 
Date 2019-06-04
 
Type
 
Identifier http://jrnl.nau.edu.ua/index.php/PTZ/article/view/13695
10.18372/0370-2197.2(83).13695
 
Source Проблеми тертя та зношування; № 2(83) (2019); 75-84
Problems of Friction and Wear; № 2(83) (2019); 75-84
Проблемы трения и изнашивания; № 2(83) (2019); 75-84
 
Language uk