Polymeric nanocomposites for dehydration of isopropyl alcohol–water mixtures by pervaporation
Електронний науковий архів Науково-технічної бібліотеки Національного університету "Львівська політехніка"
Переглянути архів Інформація| Поле | Співвідношення | |
| Title |
Polymeric nanocomposites for dehydration of isopropyl alcohol–water mixtures by pervaporation
Полімерні нанокомпозити для дегідрації сумішей ізопропіловий спирт–вода дифузійним випаровуванням |
|
| Creator |
Kittur, Arjumandbanu Abdulwahab
Madhu, Gattumane Motappa Rashmi, Sudhina Hulagurmath Rajanna, Sowmya Surapanhalli Yaranal, Naveenkumar Ashok |
|
| Contributor |
SDM College of Engineering and Technology, Karnataka, India
M. S. Ramiah Institute of Technology,Karnataka, India Indian Institute of Technology Guwahati |
|
| Subject |
дифузійне випаровування
полімерна нанокомпозитна мембрана суміш ізопропіловий спирт–вода pervaporation polymer nanocomposite membrane isopropyl alcohol–water mixture |
|
| Description |
Досліджено полімерні нанокомпозитні мембрани полівініловий спирт/ZnO. З використанням методів ІЧ-Фур‘є- і УФ-спектроскопії, рентгено-дифракційного аналізу та скануючої електронної мікроскопії проведено аналіз нанокомпозитних мембран. Встановлено, що мембрани є переважно водосорбційними і водопроникними. Показано що одержані плівки можуть бути ефективно використані для руйнування азеотропної суміші ізопропіловий спирт–вода. The present work focuses on poly(vinyl alcohol)/ZnO polymer nanocomposite membranes. The nanocomposite membranes are characterized using FTIR, UV-Vis spectra, XRD and SEM techniques. The membranes exhibited preferential water sorption and permeation. Results manifest that the fabricated films can be efficiently utilized to break the azeotropic point of isopropyl alcohol–water mixture. |
|
| Date |
2019-06-20T11:19:52Z
2019-06-20T11:19:52Z 2018-01-20 2018-01-20 |
|
| Type |
Article
|
|
| Identifier |
Polymeric nanocomposites for dehydration of isopropyl alcohol–water mixtures by pervaporation / Arjumandbanu Abdulwahab Kittur, Gattumane Motappa Madhu, Sudhina Hulagurmath Rashmi, Sowmya Surapanhalli Rajanna, Naveenkumar Ashok Yaranal // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2018. — Vol 12. — No 3. — P. 310–317.
http://ena.lp.edu.ua:8080/handle/ntb/45188 Polymeric nanocomposites for dehydration of isopropyl alcohol–water mixtures by pervaporation / Arjumandbanu Abdulwahab Kittur, Gattumane Motappa Madhu, Sudhina Hulagurmath Rashmi, Sowmya Surapanhalli Rajanna, Naveenkumar Ashok Yaranal // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2018. — Vol 12. — No 3. — P. 310–317. |
|
| Language |
en
|
|
| Relation |
Chemistry & Chemical Technology, 3 (12), 2018
https://doi.org/10.1039/JM9960600511 https://doi.org/10.1016/j.desal.2007.09.039 https://doi.org/10.1016/S0079-6700(02)00019-9 https://doi.org/10.1016/S0376-7388(00)00365-3 https://doi.org/10.1016/S0308-8146(00)00139-4 https://doi.org/10.1007/s10965-012-9838-0 https://doi.org/10.1007/s11581-007-0143-6 https://doi.org/10.3103/S1068375509020161 https://doi.org/10.1179/1743289814Y.0000000115 https://doi.org/10.1016/j.memsci.2012.08.042 https://doi.org/10.1016/S0379-6779(98)00184-2 https://doi.org/10.1080/15567265.2013.776152 https://doi.org/10.1016/j.matchemphys.2011.03.002 https://doi.org/10.1080/00150190802523594 https://doi.org/10.1016/j.compositesb.2012.10.029 https://doi.org/10.1007/s00289-015-1515-0 [1] Judeinstein P., Sanchez C.: J. Mater. Chem., 1996, 6, 511.https://doi.org/10.1039/JM9960600511 [2] Lokesh B., Rao K., Reddy K. et al.: Desalination, 2008, 233,166. https://doi.org/10.1016/j.desal.2007.09.039 [3] Kickelbick G.: Prog. Polym. Sci., 2003, 28, 83.https://doi.org/10.1016/S0079-6700(02)00019-9 [4] Sampranpiboon P., Jiraratananon R., Uttapap D. et al.: J. Membrane Sci., 2000, 174, 55. https://doi.org/10.1016/S0376-7388(00)00365-3 [5] Alvarez S., Riera F., Alvarez R. et al.: J. Food Eng., 2000, 46,109. https://doi.org/10.1016/S0308-8146(00)00139-4 [6] Kittur A., Jeevankumar B., Kariduraganavar M.: Int. J. Curr. Eng. Technol., 2013, spec. issue 1, 148. [7] Rahmani M., Ebrahimi B.: J. Ind. Syst. Eng., 2015, 8, 41. [8] Senthil V., Badapanda T., Kumar S. et al.: J. Polym. Res., 2012,19, 1. https://doi.org/10.1007/s10965-012-9838-0 [9] HemaM., Selvasekerapandian S., Hirankumar G.: Ionics, 2007,13, 483. https://doi.org/10.1007/s11581-007-0143-6 [10]MuradovM., Abdinov A., Hajimamedov R. et al.: Surf. Eng. Appl. Electrochem., 2009, 45, 167.https://doi.org/10.3103/S1068375509020161 [11] Rashmi S., Raizada A., Madhu G. et al.: Plast., Rub. Compos.,2015, 44, 33. https://doi.org/10.1179/1743289814Y.0000000115 [12] Sajjan A., Kumar B., Kittur A. et al.: J. Membrane Sci., 2013,425, 77. https://doi.org/10.1016/j.memsci.2012.08.042 [13] ChakrabortyM., Mukherjee D., Mandal B.: SyntheticMet.,1999, 98, 193. https://doi.org/10.1016/S0379-6779(98)00184-2 [14] Abd-ElrahmanM.: Nanosc. Microsc. Therm. Eng., 2013, 17,194. https://doi.org/10.1080/15567265.2013.776152 [15] Khodair Z., Alsrraf A., Manssor M. et al.: J. Electron Dev.,2012, 15, 1200. [16] Chen C., Yu B., Liu P. et al.: J. Ceramic Proc. Res., 2011, 12,420. [17]Wunderlich B.: Thermal Analysis of PolymericMaterials. Springer Science & BusinessMedia 2005. [18] Fernandes D., Hechenleitner A., Lima S. et al.:Mat. Chem. Phys., 2011, 128, 371.https://doi.org/10.1016/j.matchemphys.2011.03.002 [19] Parveen A., Kumar K., RevanasidappaM. et al.: Ferroelectrics,2008, 377, 63. https://doi.org/10.1080/00150190802523594 [20] Roy A., Gupta S., Sindhu S. et al.: Composites B, 2013, 47,314. https://doi.org/10.1016/j.compositesb.2012.10.029 [21] Rashmi S., Madhu G., Kittur A. et al.: Int. J. Chem., Molec., Nucl., Mater. Metallurg. Eng., 2013, 7, 1039. [22] Chong W., Nawawi M., Ghazali M. et al.: Jurnal Teknologi,2008, 49(F), 159. [23] Choudhari S., Premakshi H., Kariduraganavar M.: Polym. Bull., 2016, 73, 743. https://doi.org/10.1007/s00289-015-1515-0 [1] Judeinstein P., Sanchez C., J. Mater. Chem., 1996, 6, 511.https://doi.org/10.1039/JM9960600511 [2] Lokesh B., Rao K., Reddy K. et al., Desalination, 2008, 233,166. https://doi.org/10.1016/j.desal.2007.09.039 [3] Kickelbick G., Prog. Polym. Sci., 2003, 28, 83.https://doi.org/10.1016/S0079-6700(02)00019-9 [4] Sampranpiboon P., Jiraratananon R., Uttapap D. et al., J. Membrane Sci., 2000, 174, 55. https://doi.org/10.1016/S0376-7388(00)00365-3 [5] Alvarez S., Riera F., Alvarez R. et al., J. Food Eng., 2000, 46,109. https://doi.org/10.1016/S0308-8146(00)00139-4 [6] Kittur A., Jeevankumar B., Kariduraganavar M., Int. J. Curr. Eng. Technol., 2013, spec. issue 1, 148. [7] Rahmani M., Ebrahimi B., J. Ind. Syst. Eng., 2015, 8, 41. [8] Senthil V., Badapanda T., Kumar S. et al., J. Polym. Res., 2012,19, 1. https://doi.org/10.1007/s10965-012-9838-0 [9] HemaM., Selvasekerapandian S., Hirankumar G., Ionics, 2007,13, 483. https://doi.org/10.1007/s11581-007-0143-6 [10]MuradovM., Abdinov A., Hajimamedov R. et al., Surf. Eng. Appl. Electrochem., 2009, 45, 167.https://doi.org/10.3103/S1068375509020161 [11] Rashmi S., Raizada A., Madhu G. et al., Plast., Rub. Compos.,2015, 44, 33. https://doi.org/10.1179/1743289814Y.0000000115 [12] Sajjan A., Kumar B., Kittur A. et al., J. Membrane Sci., 2013,425, 77. https://doi.org/10.1016/j.memsci.2012.08.042 [13] ChakrabortyM., Mukherjee D., Mandal B., SyntheticMet.,1999, 98, 193. https://doi.org/10.1016/S0379-6779(98)00184-2 [14] Abd-ElrahmanM., Nanosc. Microsc. Therm. Eng., 2013, 17,194. https://doi.org/10.1080/15567265.2013.776152 [15] Khodair Z., Alsrraf A., Manssor M. et al., J. Electron Dev.,2012, 15, 1200. [16] Chen C., Yu B., Liu P. et al., J. Ceramic Proc. Res., 2011, 12,420. [17]Wunderlich B., Thermal Analysis of PolymericMaterials. Springer Science & BusinessMedia 2005. [18] Fernandes D., Hechenleitner A., Lima S. et al.:Mat. Chem. Phys., 2011, 128, 371.https://doi.org/10.1016/j.matchemphys.2011.03.002 [19] Parveen A., Kumar K., RevanasidappaM. et al., Ferroelectrics,2008, 377, 63. https://doi.org/10.1080/00150190802523594 [20] Roy A., Gupta S., Sindhu S. et al., Composites B, 2013, 47,314. https://doi.org/10.1016/j.compositesb.2012.10.029 [21] Rashmi S., Madhu G., Kittur A. et al., Int. J. Chem., Molec., Nucl., Mater. Metallurg. Eng., 2013, 7, 1039. [22] Chong W., Nawawi M., Ghazali M. et al., Jurnal Teknologi,2008, 49(F), 159. [23] Choudhari S., Premakshi H., Kariduraganavar M., Polym. Bull., 2016, 73, 743. https://doi.org/10.1007/s00289-015-1515-0 |
|
| Rights |
© Національний університет „Львівська політехніка“, 2018
©Kittur A., Madhu G., Rashmi S., Rajanna S., 2018 |
|
| Format |
310-317
8 application/pdf image/png |
|
| Coverage |
Lviv
|
|
| Publisher |
Lviv Politechnic Publishing House
|
|