Evaluation of in-service surface cracking of rolls of continuous casting machines
DSpace at Ternopil State Ivan Puluj Technical University
Переглянути архів Інформація| Поле | Співвідношення | |
| Title |
Evaluation of in-service surface cracking of rolls of continuous casting machines
|
|
| Creator |
Yasniy, P.
Marushchak, P. Lapusta, Yu. Baran, D. |
|
| Contributor |
Ternopil Ivan Pul’uj State Technical University, Ukraine
IFMA-LAMI, Campus de Clermont-Ferrand, France |
|
| Description |
The in-service damage in the material for rolls of continuous casting machines is investigated, in particular, the topology of surface cracks is studied, and their statistical analysis is made. Using the results of the microhardness measurements, the structural degradation of the material is evaluated depending on the distance to the roll surface. |
|
| Date |
2016-06-05T07:03:38Z
2016-06-05T07:03:38Z 2006-09-25 2006-09-25 |
|
| Type |
Article
|
|
| Identifier |
Evaluation of in-service surface cracking of rolls of continuous casting machines / P. Yasniy, P. Marushchak, Yu. Lapusta, D. Baran // Механічна втома металів. Праці 13-го міжнародного колоквіуму (МВМ-2006), 25-28 вересня 2006 року — Т. : ТДТУ, 2006 — С. 303-308. — (Розвиток втомних тріщин із урахуванням впливу корозійного середовища, температури, виду навантаження та інших факторів).
966-305-027-6 http://elartu.tntu.edu.ua/handle/123456789/16802 Yasniy P., Marushchak P., Lapusta Yu., Baran D. (2006) Evaluation of in-service surface cracking of rolls of continuous casting machines. Mechanical Fatigue of Metals: Proceeding of the 13-th International Colloquium (MFM) (Tern., 25-28 September 2006), pp. 303-308 [in English]. |
|
| Language |
en
|
|
| Relation |
ⅩⅢ міжнародний колоквіум „Механічна втома металів“
ⅩⅢ Internation Colloquium "Mechanical fatigue of metals" 1. Bulanov L. V., Korzunin L. G., Parfenov E. P., Yurovsky N. A., and Avdonin V. Yu. Continuous casting machines. Theory and design. (Ed. G.A. Shalaev), Ekaterinburg, The Ural Center of PR and advertising, 2003, 320 p. 2. Dombrovsky F.S. and Leshchinsky L.K. Serviceability of surfaced rolls for continuous casting machines. E.O. Paton Inst. of Welding, 1995, 198 p. 3. Korotkov V.A., Mikhailov I.D., Veselov A.S., and Tagiltseva V.P. Surfacing of rolls of continuous billet casting machines.” Stal”, No. 8, 2003, pp. 60-63. 4. Chudzincki J., Horn B., Tsai C.L. Mechanisms of surface deterioration - cladded rolls for continuous slab casting-Phase 1. 36th MWSP Conf. Proc., ISS-AIM. Vol. 32, 1995, pp. 67-77. 5. Tkachenko F.K. and Kholopenko N.A. Life extension for rolls of continuous billet casting machines due to the chemical composition control and selection of the hardening regime provided by the Company “Illich Mariupol Metallurgical Combine”, IX-th Regional Scientific-and- Technical Conference, Paper Abstracts, Mariupol, Vol. 1, 2002, p. 89, Priavoskiy State Technical University. 6. Srivastava A., Joshi V., Shivpuri R. Computer modeling and prediction of thermal fatigue cracking in die-casting tooling, “ Wear”, Vol. 256, 2004, p. 38–43. 7. Korotkov V. А. and Baskakov L. V. Crack growth resistance of rolls of continuous steel casting plants, “Svarochnoye Proizvodstvo”, 1993, №4, pp. 17-19. 8. Standard GOST 9450-76. Microhardness measurement by the diamond point indentation test, Moscow, 1982, p. 32. 9. Lebedev A. A., Muzyka N. P., and Volchek N. L. Determination of damage of structural materials from the scatter parameters of the hardness characteristics, Probl. Prochn. (Strength of Materials), 2002, № 4, pp. 5-11. 1. Bulanov L. V., Korzunin L. G., Parfenov E. P., Yurovsky N. A., and Avdonin V. Yu. Continuous casting machines. Theory and design. (Ed. G.A. Shalaev), Ekaterinburg, The Ural Center of PR and advertising, 2003, 320 p. 2. Dombrovsky F.S. and Leshchinsky L.K. Serviceability of surfaced rolls for continuous casting machines. E.O. Paton Inst. of Welding, 1995, 198 p. 3. Korotkov V.A., Mikhailov I.D., Veselov A.S., and Tagiltseva V.P. Surfacing of rolls of continuous billet casting machines." Stal", No. 8, 2003, pp. 60-63. 4. Chudzincki J., Horn B., Tsai C.L. Mechanisms of surface deterioration - cladded rolls for continuous slab casting-Phase 1. 36th MWSP Conf. Proc., ISS-AIM. Vol. 32, 1995, pp. 67-77. 5. Tkachenko F.K. and Kholopenko N.A. Life extension for rolls of continuous billet casting machines due to the chemical composition control and selection of the hardening regime provided by the Company "Illich Mariupol Metallurgical Combine", IX-th Regional Scientific-and- Technical Conference, Paper Abstracts, Mariupol, Vol. 1, 2002, p. 89, Priavoskiy State Technical University. 6. Srivastava A., Joshi V., Shivpuri R. Computer modeling and prediction of thermal fatigue cracking in die-casting tooling, " Wear", Vol. 256, 2004, p. 38–43. 7. Korotkov V. A. and Baskakov L. V. Crack growth resistance of rolls of continuous steel casting plants, "Svarochnoye Proizvodstvo", 1993, No 4, pp. 17-19. 8. Standard GOST 9450-76. Microhardness measurement by the diamond point indentation test, Moscow, 1982, p. 32. 9. Lebedev A. A., Muzyka N. P., and Volchek N. L. Determination of damage of structural materials from the scatter parameters of the hardness characteristics, Probl. Prochn. (Strength of Materials), 2002, No 4, pp. 5-11. |
|
| Rights |
© Тернопільський державний технічний університет імені Івана Пулюя
|
|
| Format |
303-308
6 |
|
| Coverage |
25-28 вересня 2006 року
25-28 September 2006 Україна, Тернопіль Ukraine, Ternopil |
|
| Publisher |
ТДТУ
TDTU |
|